This product is suitable for flat glass straight line bevel rough grinding, fine grinding, and the hemline polishing. Adopt coarse pitch chain to carry the glass, smooth transmission, high precision grinding. Rear transport board with the automatic cleaning device, keep it clean for long. With the Manual automotive-lubricating systems, keep the machine work in the lubricate situation. Adopt PLC automatic and manual operation system control, human interface for display, can set the glass thickness, after being processed thickness and bevel width. This product the biggest characteristic is Though lift the back guide rail to change the fall with the front, then achieve to enlarge the grinding glass size and bevel width after being processed. This machine has high precision lift, strong rigidity, and high rate of end product. Is Suitable for process lager volumes of glass mosaic.
I. Main technical data
1, Voltage: 380V/50HZ
2, Speed: 0.4~5m/min
2, Min. process size: 30X30 mm
3, Max. process size: 3000 mm X3000 mm
4, Glass thickness: 3~19 mm
5, Angel range: 3°-45°
6, Max bevel width: 40mm
7, Power: 24.3KW;
9, Overall size(L×W×H): 6800 mm×1000 mm×2500mm
10, Working height: 850mm
I. Main technical data
1, Voltage: 380V/50HZ
2, Speed: 0.4~5m/min
2, Min. process size: 30X30 mm
3, Max. process size: 3000 mm X3000 mm
4, Glass thickness: 3~19 mm
5, Angel range: 3°-45°
6, Max bevel width: 40mm
7, Power: 24.3KW;
9, Overall size(L×W×H): 6800 mm×1000 mm×2500mm
10, Working height: 850mm
| Name | Main specification |
| The material of the machine and frame | Pedestal,upright post,crossbeam,grinding head, all adopt high quality and thick material castings. Through the high temperature heat annealing treatment, the structure performance is stable |
| Front truck and back truck | adopts armor plate 40Cr,stable function, the low possibility of breakdown. |
| No. 9#, 10#Wheel head | adopts pneumatic polishing |
| Grinding Motor | adopts the products from Shanghai ABB Motor |
| water pump | Adopt SHANQING or JINGLONG brand. |
| converter motor | adopt WANGYAN converter motor with high pulling torque, front and rear guide rail linkage adopt big modulus bevel gear box, to make more stable to grinding the big bevel edge and the thickly glass. |
| Pendulum swing angle adopt screw rod rear support structure to improve the grinding level. | |
| The guide rail at front screw rod, screw nut install at the side of the upright post to make it maintain more convenience. | |
| Exit transport guide rail install the guiding arrangement for the small glass, to avoid the small glass paste on the rear board when at grinding. | |
| transfer worm gear box | adopt ZHUJIANG brand. |
| pneumatic components | adopt ZheJiang HENGYI brand |
| Bearing | adopt HRE brand |
| glass support shelf | adopt aluminum frame |
| photoelectric switch, intermediate relay | Adopt Japan OMRON brand. |
| transport timing belt | adopt YONGLI brand |
| timing belt wheel | adopt the ultra hard alufer |
| drive transducer | adopt JAPAN HITACHI |
| rotary switch emergency stop switch | adopt JIANGYIN CHANGJIANG brand |
| photoelectric switch, intermediate relay | adopt Japan OMRON brand. |
| PLC | adopt Taiwan DELTA |
| Touch screen | adopt Taiwan HITECH |
| rotary encoder | from Korea Autonics . |
| transformer, low voltage breaker, contactor | adopt JIU CHUAN CHINT brand |
