FA-261 is mainly used for straight-line bevel cutting, bevel grinding and polishing for flat glass. The front and rear chain plates both adopt the reinforced sheet steel with strong rigidity, which provide stable conveyance and high processing precision. The adoption of the Stepless Speed Variable Mechanism for adjusting the conveyance speed offers a wide range of speed selection.
I. Main technical data: FA-261
1, Voltage: 380V/50HZ
2, Speed: 0.5~3m/min
2, Min. process size: 100X100 mm
3, Max. process size: 3000 mm
4, Glass thickness: 3~12 mm
5, Angle range: 3°-20°
6, Max. Bevel Width: FA261=30mm; 7, Power: 19.5Kw
9, Overall size(L×W×H)6800 mm×1300 mm×2600mm
I. Main technical data: FA-261
1, Voltage: 380V/50HZ
2, Speed: 0.5~3m/min
2, Min. process size: 100X100 mm
3, Max. process size: 3000 mm
4, Glass thickness: 3~12 mm
5, Angle range: 3°-20°
6, Max. Bevel Width: FA261=30mm; 7, Power: 19.5Kw
9, Overall size(L×W×H)6800 mm×1300 mm×2600mm
| Name | Main specification |
| The material of the machine and frame | Pedestal,upright post,crossbeam,grinding head, all adopt high quality and thick material castings. Through the high temperature heat annealing treatment, the structure performance is stable |
| Front truck and back truck | adopts armor plate 40Cr,stable function, the low possibility of breakdown. |
| Grinding Motor | adopts the products from Shanghai ABB or CDQC Motor |
| water pump | Adopt SHANQING or JINGLONG brand. |
| converter motor | adopt WANGYAN converter motor with high pulling torque, front and rear guide rail linkage adopt big modulus bevel gear box, to make more stable to grinding the big bevel edge and the thickly glass. |
| 1.Pendulum swing angle adopt screw rod rear support structure to improve the grinding level. | |
| 2.The guide rail at front screw rod, screw nut install at the side of the upright post to make it maintain more convenience. | |
| 3.Exit transport guide rail install the guiding arrangement for the small glass, to avoid the small glass paste on the rear board when at grinding. | |
| transfer worm gear box | adopt ZHUJIANG brand. |
| pneumatic components | adopt ZheJiang HENGYI brand |
| Bearing | adopt HRE brand |
| glass support shelf | adopt aluminum frame |
| photoelectric switch, intermediate relay | Adopt Japan OMRON brand. |
| transport timing belt | adopt YONGLI brand |
| timing belt wheel | adopt the ultra hard alufer |
| drive transducer | adopt JAPAN HITACHI |
| rotary switch emergency stop switch | adopt JIANGYIN CHANGJIANG brand and Guangzhou BENLI brand |
| photoelectric switch, intermediate relay | adopt Japan OMRON brand. |
| PLC | adopt Taiwan DELTA |
| Touch screen | adopt Taiwan HITECH |
| rotary encoder | from Korea Autonics . |
| transformer, low voltage breaker, contactor | adopt JIU CHUAN CHINT brand |
