This machine is applied in covering and pressing various notebooks, photo books
(photo album), folders, certificates, hardcover books. This process is finished easily at
twice on both sides at the same time by one operator. It is the good partner of post-press,
especially the digital post-press.
1. Adopting PLC operating system
2. Use hot glue, cold glue
3. Replace products, fast adjustment speed. The thickness of the cardboard could be adjusted
Automatically.
4. Automatic and pneumatic feeder position by foot switch
5. Adjust the size by rotating the handle wheel
6. Light tube inside the working table makes the position more accurate.
(photo album), folders, certificates, hardcover books. This process is finished easily at
twice on both sides at the same time by one operator. It is the good partner of post-press,
especially the digital post-press.
1. Adopting PLC operating system
2. Use hot glue, cold glue
3. Replace products, fast adjustment speed. The thickness of the cardboard could be adjusted
Automatically.
4. Automatic and pneumatic feeder position by foot switch
5. Adjust the size by rotating the handle wheel
6. Light tube inside the working table makes the position more accurate.
| Model | MF-SCM500A |
| Power Supply | 380V/50HZ |
| Mainframe Power | 5.2kw |
| Work Speed | 3-6PCS/minute |
| Paperboard Thickness | 1-4mm |
| Hard Case Spine Width(min) | 8mm |
| Open Book Case Size(max) | 780*430mm |
| Open Book Case Size(min) | 120*120mm |
| Machine Dimensions(L×W×H) | 1780×1620×1400mm |
| Cover Material Thickness | 80-200g |
| Machine Weight | 550kg |
