Quality Spray Hank Dyeing Machine

Automation of Dyeing Machine
Use various microcomputers to control dyeing machinery at different levels so that we can satisfy customers who have different demands. The control of the dyeing machinery is like that; According to the hint of the operator it can simply control the increasing and decreasing of temperature except at the time of feeding in, taking out the yam and samples taking. The water flow is measured by the flow meter and it keeps accurate liquor ratio. The control of dyeing machine can also be full automation:

Pump starring, temperature raising keeping, and lowering. Automatic dyeing stuff supplying (or step by step feeding), and working with a central cabinet and central supplier. The full automatic dyeing machine decreases the manual operation to the minimum, improves greatly the comprehensive economic results. And ensures the reproducibility of dyeing technology, during the dyeing procedure it can also execute other operation, such as display temperature at the present time, or retrieve last dyeing program or prepare new dyeing program.

The microcomputer on dying machine can be linked with control computer system to complete central programming. And can execute various tasks of management so that the comprehensive management of the whole workshop by computer can be realized.

STANDARD FEATU RE
Steady construction of highly corrosion resistance stainless steel for all wetted parts. Hanks bars formed in strength - imported shape with surface fine polished to 63 microns. Heating coils, are built in the machine's upper and lower compartment to ensure even heating. A stream - bleeding pipe is provided for direct heating. Flow blade, provides uniform distribution of liquor throughout the bath. Sampling device (normal capacity 40gm), with sample holder protrudes deeply into hank yarn, resulting in the same color shade as the batch. Inspection on yarn color shade is possible during dyeing process without interruption. Service tank with 2 HP feed pump (not available for sample machinery up to 50 lbs. Impeller speed variable through step pulley to suit different dyeing processes. Universal control panel formanual control of dyeing process.

Technical Data
Maximum working temperature 98 C
Heating rate: Approximate 3-5 minutes
Cooling rate: Approximate 2-4 minutes
Length of carrier bar: 1200mm
Suitable for length of hank: 500-915mm (20"-32")

JPS series of atmospheric and normal temperature spray hank-dyeing machine, its nominal capacity is 10kg to 600kg. It is suitable for bleaching, scouring and dyeing of natural, man-made and synthetic fibers such as mercerized yarn, rayon. Spun silk. Singles actuate rayon. Lien yarn and silk like. Liquor ration (9: 1-15: 1) can be adjusted according to the variety of the yarns and the dyeing technology. So that energy, water and steam can greatly be saved and about 20% of dyeing stuff and auxiliary agents can be saved as well. At the same time, wasted liquor can be decreased. Therefore, improves the economical results greatly.

PRIMARY BENEFITS
Advanced Pump Design.
The key to success for dyeing machine is its pump. JPS series of spray dyeing machine has a reversible high performance-mixing pump that uses our patented design and has advantage of high efficiency: The flow must be even more directional. It enhances greatly the penetrating power, lowers consumption and raises efficiency. So that even dyeing can be obtained without speck and raising defect. The selected pump is famous is famous in the world, since its mechanical sealing diameter is mall and liner velocity is low. So that it is durable and the operation rate of dyeing machine is greatly increased. The problem of damaged motor that caused by leaking from the sealing shaft now is thoroughly solved and the pump is safer, more reliable and has a long lifespan.