Features of NT08 mini digger:
1) Adopting imported Cummins, Yanmar or Kubota engine.
2)The hydraulic system uses Kawasaki, Japan (KAWASAKI).
3)Rubber hose, tube, fittings and seals selected Parker (PARKER).
4)Fully sealed cab.
5) Heating and air conditioning.
6)The best cooling system.
1) Adopting imported Cummins, Yanmar or Kubota engine.
2)The hydraulic system uses Kawasaki, Japan (KAWASAKI).
3)Rubber hose, tube, fittings and seals selected Parker (PARKER).
4)Fully sealed cab.
5) Heating and air conditioning.
6)The best cooling system.
| Main Specifications | Unit | |
| Operating weight | kg | 820 |
| Engine model | Kubota Z602 Japan | |
| Rated engine power | kw/rpm | 7.4/2200 |
| Peak Torque | Nm/rpm | 35/1700 |
| Standard Bucket Capacity | m 3 | 0.022 |
| Max. Swing Speed | rpm | 9.2 |
| Rear Swing Radius | mm | 820 |
| Bucket | kN | 9.6 |
| Arm | kN | 8.5 |
| Fuel Tank | L | 9.5 |
| Hydraulic Tank | L | 16 |
| Ground Pressure | kpa | 25 |
| Traveling Speed | km/h | 2 |
| Gradeability | 30°(58%) | |
| Ground Clearance | mm | 115 |
| Boom Swing Angle(LH/RH) | 85°/ 43° | |
| Dozer Width* Height | mm | 820*200 |
| Max.lift above/below ground | mm | 105/210 |
| Main Gear pump pressure | Mpa | 18.5 |
| Main Gear pump flow | L/Min | 11*11 |
| Overall Dimensions(L*W*H) | mm | 2760*820*1350 |
