8 10/100 Mbps Ports, 802.3at PoE Ethernet Switch 25.5w
>The PoE Switch POE31008P-at provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The four RJ45 network ports can be used for any 10/100 Mbps link and four of these ports can supply industry-standard IEEE 802.3at power.
>Advanced auto-sensing algorithm gives power only to IEEE802.3at end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the PoE Switch POE31008PF automatically determines PoE requirements, speed, duplex, and cable type using Auto Uplink™ .
Product Main Features
- IEEE 802.3at power on up to 8 ports
- Supply power to wireless access points and surveillance cameras over Cat-5 cabling
- 8 10/100 Mbps Ports with AutoUplink™
- Supports PoE power up to 25.5W for each PoE port
- Supports PoE power up to 210W for all PoE ports
- Supports PoE IEEE 802.3at compliant PDs
- Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
- 1K entry MAC address table of the PoE Switch POE31008P-at with auto-learning and auto-aging
- LED indicators for monitoring power, link, activity and speed
- External power adapter supply
>The PoE Switch POE31008P-at provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The four RJ45 network ports can be used for any 10/100 Mbps link and four of these ports can supply industry-standard IEEE 802.3at power.
>Advanced auto-sensing algorithm gives power only to IEEE802.3at end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the PoE Switch POE31008PF automatically determines PoE requirements, speed, duplex, and cable type using Auto Uplink™ .
Product Main Features
- IEEE 802.3at power on up to 8 ports
- Supply power to wireless access points and surveillance cameras over Cat-5 cabling
- 8 10/100 Mbps Ports with AutoUplink™
- Supports PoE power up to 25.5W for each PoE port
- Supports PoE power up to 210W for all PoE ports
- Supports PoE IEEE 802.3at compliant PDs
- Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
- 1K entry MAC address table of the PoE Switch POE31008P-at with auto-learning and auto-aging
- LED indicators for monitoring power, link, activity and speed
- External power adapter supply
| Product | 9-Port 10/100M Switch with 8-Port POE |
| Type | POE31008P-at |
| Network Ports | 8 10/100Mbps RJ45 PortsAUTO Negotiation/AUTO MDI/MDIX |
| Power Pin Assignment |
Data provided over pairs over 1/2and 3/6 ,Power over spare pairs4/5(+) and 7/8 (-) |
| PoE Distance | 100m |
| Transmission Method | Store-And-Forward |
| Network Media | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) |
| 100BASE-TX: UTP category 5, 5e cable (maximum 100m) | |
| Performance Specifications | Bandwidth:1.6 Gbps |
| Network latency:Less than 20 μs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission | |
| Buffer memory:96 KB embedded memory per unit | |
| Address database size:1,000 media access control (MAC) addresses per system | |
| Addressing:48-bit MAC address | |
| Mean Time Between Failure (MTBF):190,000 hours (~ 21 years) | |
| Acoustic Noise: 0 dB | |
| Network Protocol and Standards | IEEE 802.3i 10BASET |
| IEEE 802.3u 100BASETX | |
| IEEE 802.3x Flow Control | |
| IEEE 802.1at DTE Power via MDI | |
| IEEE 802.3at | |
| Status LEDs | System: Power, PoE Maximum Power |
| Per Port: Link, Activity, Speed, PoE Active, PoE Fault | |
| Power Supply | Total Power Consumption: 220 W maximum |
| PoE Watt budget: 210W | |
| IEEE802.3at Power Consumption: 210W maximum (Ports 1 – 8) | |
| AC110V~265V 50Hz power input; plug is localized to country of sale | |
| Physical Specifications | Dimensions (H x W x D):44 x 279 x 195mm |
| Weight:1.25kg | |
| Environmental Specifications | Operating temperature: 0 to 55°C |
| Storage temperature: -20 to 75°C | |
| Operating humidity: 90% maximum relative humidity, non-condensing | |
| Storage humidity: 95% maximum relative humidity, non-condensing | |
| Operating altitude: 10,000 ft (3,000 m) maximum | |
| Storage altitude: 10,000 ft (3,000 m) maximum | |
| Electromagnetic Emissions | CE mark, commercial |
| FCC Part 15 Class B | |
| VCCI Class B | |
| EN 55022 (CISPR 22), Class B |
