YH(200)-1800 Automatic Facial Tissue Folder
This machine line adopt the PLC control system, HMI, one button Chinese - English language switch, independent frequency conversion synchronous drive, and mechanic and photoelectric integration, and so on some advanced technology. Machine equipped with whole line self-detection system, it can observe itself during the productivity, keeping the machine line in optimal situation.
The folding roll and cut off roll are process with Computerized Numerical Control (CNC), also every roll adjust by the balance test to make sure the rolls can perform at high speed operation.
The edge embossing roll surface is cover by some special material and to be chromed.
Each back stand has two 160mm width unwinding blet, make sure the jumbo roll cann easily unwinded.
The machine would not slip when the machine stop urgently.
This machine line adopt the PLC control system, HMI, one button Chinese - English language switch, independent frequency conversion synchronous drive, and mechanic and photoelectric integration, and so on some advanced technology. Machine equipped with whole line self-detection system, it can observe itself during the productivity, keeping the machine line in optimal situation.
The folding roll and cut off roll are process with Computerized Numerical Control (CNC), also every roll adjust by the balance test to make sure the rolls can perform at high speed operation.
The edge embossing roll surface is cover by some special material and to be chromed.
Each back stand has two 160mm width unwinding blet, make sure the jumbo roll cann easily unwinded.
The machine would not slip when the machine stop urgently.
| Descriptions | Specifications: |
| Unfloded finished product Y(mm) | 200(other size to be specified!) |
| Two plies of jumbo roll (gsm) | Single ply 13~18 gsm |
| Maximum jumbo roll diameter (mm) | ∅1500X1800(other size to be specified!) |
| Jumbo roll core diameter (mm) | ∅76.2(other size to be specified!) |
| Mechanic speed (m/min) | 130 m/min |
| Production speed (m/min) | 0~90 |
| Main drive (KW) | 5.5-11.5 |
| Vacuum pump (KW) | 22(LTV150) |
| Vacuum pump pressure (MPa) | ≥0.6 |
| Vacuum pump capability (m3/min) | ≥0.18 |
| Oil pump (W) | 90 |
| Oil pump power supply (V Hz) | 3 phase, 380v 50Hz |
| Machine installed power (V Hz) | 3 phase, 380v 50Hz |
| Machine Max. noise (db) | 60 |
| Vacuum pump Max. noise (db) | 80 |
| Control Voltage (V) | 24 |
| Cut off | with the upper blade stay still, the lower blade rotate to cut off the paper |
| Machine framework | the metal plate and welding structure |
| Paper thread up | manual |
| Paper detection | Web break detectors throughout all the units on the line and automatic stop |
| Machine drive | Motor drive, reducer (with chain), timing belt, flat belt,chain, triangle belt |
| Safety protection | each mian drive unit cover by the guard |
| Paper alignment | manual |
| Web tension | Floating roll control system (option) |
| Paper loading system | Automatic and pneumatic loading system |
| Jumbo roll discharge | 2 horizontalpaper discharge system(other size to be specified!) |
| Embosser(option) | Embossing roll diameter is 150, independent embossing unit, 2 sets of pneumatic steel to steel embosser. (standard pattern, adjustable) |
| Edge embosser (option) | 4mm/line |
| Paper thread up system | Rubber roll, stepless speed adjust, and adjustable paper transfer roll |
| Folding roll | Adjustable |
| Paper counter discharge system | Pneumatic paper discharge board |
| Paper discharge system | Stepless speed control flat belt |
| Slitting system (standard) | 9 sets of slitting blade |
| Trimming system (option) | Vacuum suction trimming(option) |
| Jumbo roll driven | Flat belt driving |
| Jumbo roll speed adjust | V-pulley and flat belt stepless speed control |
| Dimension (mm) | Depend on the machine model |
| Weight (kg) | Depend on the machine model |
| Colour | Ivory-white and blue |
