Automatic Hot and Cold Cut Ribbon Cutting Machine
This machine can be used to cut the label,pipe,tube,belt, webbing, fabric, cloth, plastic,film, wire,shrinkabletube,cable ties,silicone tube,pvc tube,wire,plastic hose pipe,rubber hose,teflon tube,chequered tube,velcro,insulated sleeve,insulation paper,copper foil and so on.
Special design for your option:
Hot knife design make sure cutting withour damage to the webbing
Eye device design is to cut printed webbing or ribbon with logo.Every cut will be cut at the right place
YS-100
Electrical Source | 220V 50/60HZ |
Power | 250w |
Cut Length | from 0.1 MM to 9999.9MM |
Cut Width | from 0.1 MM to 100MM |
Cut Speed | It depen on the cut length,from 50 PCS to 120PCS per minute |
Net Weight | 28KG |
Outer size | L360*W320*H350 mm |
Packaging detail | Carton or wooden case with foam plastics.L460MM*W610MM*H460MM. |
Features and Functions:
1.The machine mother board is reserched and designed by ourselves,which has a high precisition (0.1MM)
2.Normal cutting machine is cold knife.And It also can equip hot knife,can be used for cut ribbon,nylon belt,elastic and so on.
3.The cut speed and length can be setted as your need.
4.The totality you need to cut can be divided into several groups or cut it once in all.
5.It can set up a suspend time when finished a cut quantity, and it can stop by itself when completed,no need the woker to watch it.
6.Pole on the machine is to hold the material roller but it need to below 10kg.
7.Menu,system and manual instruction are in English,it is easy to use
8.This cutting machine can count.
How to choose a suitable machine?
The only difference between different models is the blade length.
According to the width of the material that you want to cut, you can choose suitable machine model.
YS-100(Blade width 100mm): Cut materials less than 100mm in width
YS-120(Blade width 120mm): Cut materials less than 120mm in width
YS-160(Blade width 160mm): Cut materials less than 160mm in width
YS-200(Blade width 200mm): Cut materials less than 200mm in width
YS-250(Blade width 250mm): Cut materials less than 250mm in width
YS-300(Blade width 300mm): Cut materials less than 300mm in width
Materials Can Cut:
CE certification has approved:
