PLC, 10inch color touch display, servo control, Software independent property rights,
With 30 years CNC pipe bending machine research and development experience, convenient operation, stable and reliable work, high speed and precision
1 With manual, semi-automatic and automatic operation function.
2 In any fitting processing time can suspend operation, in order to observe the fitting processing status and adjust the die clearance.
3 With the fuction of data lock and memory, to prevent any changes and error changes
4 Both rotation axis and feeding axis can be set speed from grade1 to grade9, for same processing pipe fitting, each processing can be set at different speeds.
5 Each operation data can be input by touching screen, touch screen can real-timely monitor the running state for the equipment and the datas.
6 Three axis can return to zero at the same time without operator adjustment. This improves the machining repeat precision.
7 Each processing pipe fittings can be set 30 bends, stor 200 tube type datas.
8 Self-diagnosis errors and equipment failures, and display the error code and failure reason on the screen, to help the operator easy to troubleshoot.
9 With the function of power failure memory, data kept permanently, to prevent data loss due to power failure or equipment failure.
With 30 years CNC pipe bending machine research and development experience, convenient operation, stable and reliable work, high speed and precision
1 With manual, semi-automatic and automatic operation function.
2 In any fitting processing time can suspend operation, in order to observe the fitting processing status and adjust the die clearance.
3 With the fuction of data lock and memory, to prevent any changes and error changes
4 Both rotation axis and feeding axis can be set speed from grade1 to grade9, for same processing pipe fitting, each processing can be set at different speeds.
5 Each operation data can be input by touching screen, touch screen can real-timely monitor the running state for the equipment and the datas.
6 Three axis can return to zero at the same time without operator adjustment. This improves the machining repeat precision.
7 Each processing pipe fittings can be set 30 bends, stor 200 tube type datas.
8 Self-diagnosis errors and equipment failures, and display the error code and failure reason on the screen, to help the operator easy to troubleshoot.
9 With the function of power failure memory, data kept permanently, to prevent data loss due to power failure or equipment failure.
| Specification/Model | WFCNC25x4 | ||
| Max. bending capacity(mm) | Φ25x4 | ||
| Min. bending capacity(mm) | Φ4 | ||
| Max. bending radius(mm) | 100 | ||
| Min. bending radius(mm) | 10 | ||
| Max. bending angle | 190 | ||
| Length of mandrel(mm) | 3000 | ||
| Mandrel stroke(mm) | 100 | ||
| Mandrel adjustment(mm) | 50 | ||
| Clamp die stroke(mm) | |||
| Clamp die return stroke(mm) | |||
| Follower die stroke(mm) | 300 | ||
| Pipe end Min. length(mm) | 50 | ||
| Tools centerline height(mm) | 30 | ||
| Working height(mm) | 1015 | ||
| Speed range | Bending speed C(r/min) | 0-40 | |
| Feeding trolley walking speed Y(r/min) | 0-80 | ||
| Clamping set speed B(r/min) | 0-60 | ||
| Pre-set speed(each axis-CNC) | 9 | ||
| Working accuracy | Bending accuracy C axis(°) | ±0.05 | |
| Feeding accuracy Y axis(°) | ±0.1 | ||
| Rotary accuracy B axis(°) | ±0.05 | ||
| Capacity of memory | 10^5 | ||
| C-axis stall torque(N.m) | 1750 | ||
| Motor power (KM) | 13 | ||
| Hydraulic system pressure(Mpa) | 15 | ||
| Hydraulic tank capacity(L) | 200 | ||
| Dimensions: L*W*H(m) | 4.79*1.24*1.5 | ||
