This machine is PLC controlled hydraulic pipe bender, can be spiral wound bent with or without core.
The main characteristics of this equipment are as follows:
1.Japan MITSUBISHI control system ensure excellent performance and reliable safety.
The main characteristics of this equipment are as follows:
1.Japan MITSUBISHI control system ensure excellent performance and reliable safety.
2.The main transmission adopts hydraulic drive, with high bending quality and smooth velocity.
3.Can bend same radius tube with many bends and multi-perspective.
4.This machine is suitable for winding type bending for all kinds of pipes (including special tube ) ,
specially suited for bending pipes with many bends and multi-perspective.
| Specification/Model | WFYNC168x14 |
| Max. Bending capacity | Φ168x14 |
| Yield Lim.(Mpa) | 240 |
| Max. Bending angle(°) | 195 |
| Min. Centerline radius(mm) | 500 |
| Range of centerline radius(mm) | R250-800 |
| Clamped die stroke(mm) | 180 |
| Bending speed(r/min) | 0.4 |
| Standard mandrel length(mm) | 4500 |
| Mandrel stroke(mm) | 320 |
| Hydraulic system pressure(Mpa) | 14 |
| Motor rotation speed(r/min) | 1470 |
| Motor power(kw) | 22 |
| Dimensions: L*W*H(m) | 6.15*2.4*1.52 |
