Wanfang YNC serious Hydraulic tube bending machine was full hydraulic drive, control system adopt micro computer PLC control,
With mandrel, clamp block, guidance, follow-up, bending device, touch-screen HMI, can store 500 tube type data, each group can be set 12 different angles. With the PLC program you can select jog, step or semiautomatic operation,
With function of working pieces automatic counting and store without electrical power. The rotated angle can be positioned exactly by an opticalelectric encoder,
So the working pieces can show a high precision after bended by this machine, this machine fit for batch production with economic and practical characteristics.
With mandrel, clamp block, guidance, follow-up, bending device, touch-screen HMI, can store 500 tube type data, each group can be set 12 different angles. With the PLC program you can select jog, step or semiautomatic operation,
With function of working pieces automatic counting and store without electrical power. The rotated angle can be positioned exactly by an opticalelectric encoder,
So the working pieces can show a high precision after bended by this machine, this machine fit for batch production with economic and practical characteristics.
| Specification/Model | WFYNC51x6 |
| Max. Bending capacity | Φ51x6 |
| Yield Lim.(Mpa) | 240 |
| Max. Bending angle(°) | 195 |
| Min. Centerline radius(mm) | 153 |
| Range of centerline radius(mm) | R30-210 |
| Clamped die stroke(mm) | 100 |
| Bending speed(r/min) | 3 |
| Standard mandrel length(mm) | 2500 |
| Mandrel stroke(mm) | 100 |
| Hydraulic system pressure(Mpa) | 15 |
| Motor rotation speed(r/min) | 1420 |
| Motor power(kw) | 5.5 |
| Dimensions: L*W*H(m) | 4*1.1*1.15 |
