1. The main characteristics
Auto feeding laser cutting machine TR-1610AU/1810AU is newly developed craft cutting machine.It is of high speed and accuracy,stable performance.This series machine adopt imported stepping motor and driver with unique high speed outer guide rail.The patented frame adopts the most solid design with less welding/bending concepts and heat treatment which can ensure no deformation during long time operation and transportaion.The optimized optical hardware design facilitates the laser beam control and reduces the light failure,high speed USB2.0 port and 32bit DSP controller.
2. Applied materials
ALL the Non-Metals and Painted Metals,
Such as Acrylic,MDF,Double-Color board,Wood planks (light planks,candlenut wood), Plywood,Cork, Bamboo,Plexiglas,Normal glass, shell , coconut shell , ox horn , animal grease,Crystal,Plastic,Rubber,PVC board,Leather,Fabric,Paperboard,Granite,Marble,Tile,Foam,Ceramic,Corian,Delrin
3. The samples
4. Standard accessories
1× Water Chiller
1× Air Compressor
2× USB Cable
1× Power Cable
1× CD (Including Laser Software, User-friendly Instruction Manual, Guiding Videos)
1× Tool box
5. Optional accessories
1) Honeycomb table
2) Upgrading the Laser Power to 80/100/130W
6. Operating Software
Including but not limited to the following 3 softwares
7. Videos
FOR MORE VIDEOS, PLEASE VISIT OUR YOUTUBE HOMEPAGE: http: //www. youtube. com/user/Triumphlaser? view_as=public
FOR MORE MACHINE INFORMATION, PLEASE VISIT OUR WEBSITE:
www. triumphlaser. com
8. Warranty period
1). The Whole machine: Full 2 Years' warranty.
2). The Consumables (Laser tube and Mirrors & Lens): 3 Months'warranty.
3). The Warrnty is dated from Ex Factory Date.
4). We will provide Lifetime Service online, You can get tech support Within 24hours by Email/Telephone/Skype/MSN/Romote Assistance etc.
9. Shipping instructions
Securely packaged into Ply-wooden Case, AND Shipped to worldwide by DHL, by Air Or by Sea Within 3 work days after Receiving payment.
10. Payment instructions
1. T/T in advance
2. Other credible payment if acceptable
Q: Do I need separate laser systems for engraving and cutting?
A: No, our laser machine can do both engraving and cutting very well. You just need one machine for both kinds of jobs.
Q: Does your laser run from a laptop or Desktop PC?
A: Both ok, an long as your operating system is window 2000, windows xp, windows vista or windows 7.
Q: What files is the software compatible with?
A: JPG, PNG, BMP. PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA, PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW etc.
Q: Can you explain what the differences are between the different watt laser tubes?
A: Usually, the power of Laser tube is decided by two parameters:
1. the Length of the tube. (The longer Laser tube is, the more powerful)
2. the Diameter of Laser tube. ( The bigger Laser tube is, the more powerful)
AND bigger watt Laser tube cut thicker materials, however, bigger watt has big Laser beam, therefore, For engraving, , It's better to use small watt Laser tube like 50watt and 60watt.
Q: What are the limitation of different watt laser tube, or Whar are the maximum thickness we can cut through, for example, Acrylic?
A: 1.50watt Laser tube 12mm Acrylic.
2.60watt Laser tube 15mm Acrylic.
3.80watt RECI Laser tube 25mm Acrylic
4.100watt RECI Laser tube/130watt RECI Laser tube 30mm Acrylic
Q: What's the lifetime of laser tube?
A: Normally, the Lifetime of 50w/60w Laser tube is about 3500 hours; 80w/100w/130w RECI Laser tube is 10000 hours. In fact, It depend on how you use it. If you use a Laser tube 8 hours/day, the approximate lifetime in below:
1.20-30% power, Lifetime should be about 1-2 years.
2.40-50% power, Lifetime should be about 1 year.
3.70-80% power, Lifetime should be about 6-7 months.
| Model | TR-1610AU/TR-1810AU |
| Laser Type | CO2 laser tube |
| Laser Power | 60W-150W |
| Working Area | 1600mm×1000mm/1800mm×1000mm |
| Engraving Speed | 500mm/s |
| Cutting Speed | 500mm/s |
| Repeat Accuracy | ±0.05mm |
| Moving System | CNC control system |
| Cutting thickness | 0-30mm Acrylic |
| Cooling Mode | Water cooling system |
| Whole Power | ≤1250W |
| Working Voltage | 220±10%50Hz(60Hz) |
| Operating Temperature | 0°-45° |
| Prerating Humidity | 5%-95% |
| Controlling Software | Triumph laser software |
| Graphic Format Supported | CAD,BMP,JPG,PNG,TIF,PCX,TAG,LOO,GIF,PLT |
| Gross Weight | 700KG |
