Domestic China Brand Laser Cutting Engraving Machine

1. MACHINE MAIN FEATURES:
1. New high-efficiency laser tube, the laser beam is more stable than the traditional type, the lifetime of the laser tube can be over 10000 hours.
2. Compared with the ordinary laser machine, this machine is equipped with auto-focus device and moterized up/down worktable, very convenient and precise.
3. Advanced DSP control system, professional motion control chip, consecutive high speed curve cutting and the shortest path selection function improve the working efficiency a lot.
4. With red light positioning device accurately indicates the location of the processing of the laser head, eliminating the trouble about manual positioning.
5. Customers could output file to machine by self-software or CorelDraw or AutoCAD directly. With USB interface, even without computer, only by U flash disk, the machine will read the file and run for it. With elegant outlook and perfect function, distributors will gain more customers and clients.
2. STANDARD ACCESSORIES:
1 X water chiller(CW-3000) 1 X air compressor 1 X exhaust blower 1 X auto-focus laser head

3. APPLICATION MATERIALS:
1. Advertising industry: Acrylic plate. Color board and other advertising materials engraving and cutting;
2. Leather garment processing industry: Leather, fabric carve or hollow out patterns;
3. Arts and crafts industry: Paper cutting, wood, bamboo, leather, shell, ivory and other materials engraving and cutting;
4. Model industry: Building models, aviation and maritime models, wooden toys engraving cutting etc;
5. Packaging industry: Rubber printing plate engraving cutting, bilayer plate, knife model cutter board etc.
6. Decoration industries: Electrical and electronic industry materials' engraving and cutting.

VIDEOS/DETAILS WEBSITES ABOUT MACHINE/COMPANY:
For more videos, pls. Visit our youtube homepage: HTTP: //I. Youku. COM/u/UNTc2MDQxMjc2/videos
For more machine details, pls. Visit our website: Www. Triumphlaser. COM
WARRANTY AND COMMITMENTS:
2 years of the machine
3 monthes of the consumables(1 laser tube, 3 reflecting glass and one focus lens)
4. FAQ:
Q: Do I need separate laser systems for engraving and cutting?
A: No, our laser machine can do both engraving and cutting very well. You just need one machine for both kinds of jobs.
Q: What files is the software compatible with? A: JPG, PNG, BMP. PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA, PCX, JP2, JPC, PGX, RAS, PNM,
SKA, RAW etc.
Q: Can you explain what the differences are between the different watt laser tubes?
A: Usually, the power of Laser tube is decided by two parameters: The Length of the tube. (The longer Laser tube is, the more powerful)the Diameter of Laser tube. (The bigger Laser tube is, the more powerful)AND bigger watt Laser tube cut thicker materials, however, bigger watt has big Laser beam, therefore, For engraving, It's better to use small watt Laser tube like 50watt and 60watt.
Q: What are the limitations of different watt laser tube, or Wharf is the maximum thickness we can cut through, for example, Acrylic?
A: 1.50watt Laser tube10mm Acrylic. 2.60watt Laser tube 12mm Acrylic. 3.80watt RECI Laser tube 25mm Acrylic4.100watt RECI Laser tube/130watt RECI Laser tube 30mm Acrylic
Q: What's the lifetime of laser tube?
A: Normally, the Lifetime of 50W/60W Laser tube is about 3500 hours; 80W/100W/130W RECI Laser tube is 10000 hours.
Q: How much time do I need to speed on learning how to run the laser machine?
A: If you know how to design jobs in graphic software, it just takes flews hours for you to become a master of laser machine. You just need to do some tests to know what speed and power is good for different materials
RECOMMENDED CONSUMABLE PARTS:
1.80watts CO2 Laser tube
2. Mirorrs&Lens
3. We recommend you to order 1PC Spare Laser tube and 1set Spare Mirrors&Lens(Including 3 Reflecting Mirrors+1 Focusing Lens), It will reduce much shipping cost and time when need them.