HDPE/LDPE Film Blowing Machine(GY-CM-PE)
This film blowing machine is suitable for blowing the plastic film as high density Polyethylene (HDPE), low density Polyethylene (LDPE) and linear low density Polyethylene (LLDPE), which is widely used for packing foodstuff, garment, textile, daily-use articles and industrial products etc. It can produce pearl film and degradation film via making up a prescription. This kind of machine is the widest use in the market at present and it's the preferred machine for building a film-blowing factory.
Characteristic:
1. The screw and cylinder are made of 38CrMoAl high quality alloy steel after fine finishing and nitrided treatment, which has high hsrdness, srrong resistance to corrosion, durable service.
2. The die head is plated with hard chrome, of screw mandrel type structure with even and smooth discharging, the blown plastic film has fine finishing; The blower is of labyrinth structure with even air output.
3. The coiling unit adopts pressure friction rewinding or center rewinding, which is driven by torque motor, with even and smooth rewinding and easy roll changing.
Technical Parameters:
This film blowing machine is suitable for blowing the plastic film as high density Polyethylene (HDPE), low density Polyethylene (LDPE) and linear low density Polyethylene (LLDPE), which is widely used for packing foodstuff, garment, textile, daily-use articles and industrial products etc. It can produce pearl film and degradation film via making up a prescription. This kind of machine is the widest use in the market at present and it's the preferred machine for building a film-blowing factory.
Characteristic:
1. The screw and cylinder are made of 38CrMoAl high quality alloy steel after fine finishing and nitrided treatment, which has high hsrdness, srrong resistance to corrosion, durable service.
2. The die head is plated with hard chrome, of screw mandrel type structure with even and smooth discharging, the blown plastic film has fine finishing; The blower is of labyrinth structure with even air output.
3. The coiling unit adopts pressure friction rewinding or center rewinding, which is driven by torque motor, with even and smooth rewinding and easy roll changing.
Technical Parameters:
| Type | 45 | 50 | 55 | 60 | 70 | 80 | 85 | 90 | 110 | 110-2 | |
| Diameter of Screw(mm) | Φ45 | Φ50 | Φ55 | Φ60 | Φ70 | Φ80 | Φ85 | Φ90 | Φ110 | Φ110 | |
| L/D ration of screw | 30:1 | ||||||||||
| Specification of Die Head | Φ40 -100 | Φ60 -130 | Φ70 -160 | Φ90 -200 | Φ110 -250 | Φ200 -300 350 | Φ200 -350 | Φ400 -500 | Φ400 -600 | Φ400 -900 | |
| Thickness of Products(mm) | 0.004-0.08/0.025-0.15 | ||||||||||
| Folding width of Products(mm) | 100 -600 | 100- 800 | 100- 1100 | 100- 1200 | 200- 1500 | 200- 1600 | 200- 1800 | 200- 2000 | 200- 2500 | 200- 4000 | |
| Main power(kw) | 12 | 18 | 22 | 22 | 22 | 30-37 | 37-45 | 37-45 | 55-75 | 75× 2 | |
| Max. Output(kg/h) | 30 | 35 | 50 | 60 | 80 | 70-100 | 100-130 | 180 | 280 | 450 | |
| Weight(T) | ≈1.6 | ≈1.8 | ≈2.0 | ≈2.2 | ≈4 | ≈4.5 | ≈5 | ≈6 | ≈6.5 | ≈8 | |
| Overall Dimensions(L× W×H) )(m ) | 3.6× 1.5 × 3.5 | 4×1.9×3.8 | 4.1×2×4.3 | 4.2×2.2×4.5 | 5× 2.7× 5.5 | 5.3× 2.9× 6 | 6× 3.1 × 7 | 7× 3.3× 7.5 | 8× 3.8 × 9 | 9× 3.5× 15 | |
