Electrodynamic Vibration Test System
Vibration System:
(1) Double magnetic circuit structure to ensure high magnetic field intensity & reduce flux leakage;
Special degaussing structure can reduce flux leakage to below 1 mt
(2) U-type spring ,rollers and linear bearing for strong resistance of deflecting load
(3) Air spring are used for vibration isolation; Vibration system work steadily even with heavy load;
no need special foundation
(4) Protection devices are provided for over-thermal, over-load, over-current, over-voltage, and
over-displacement of the vibration tester;
Electrical network protection devices for over-voltage, under-voltage, lacking phase;
Drive power , current-limiting , soft-start, over-temperature, short-current,module fault protecting
(5) Can complete sine ,random , impact environmental tests
(6) This system has little requires for voltage fluctuation, ≤±10% is OK
(7) This system has little requires for Grounding resistance, ≤4Ω is OK
(8) High reliability, especially suitable for long-time running
(1) Double magnetic circuit structure to ensure high magnetic field intensity & reduce flux leakage;
Special degaussing structure can reduce flux leakage to below 1 mt
(2) U-type spring ,rollers and linear bearing for strong resistance of deflecting load
(3) Air spring are used for vibration isolation; Vibration system work steadily even with heavy load;
no need special foundation
(4) Protection devices are provided for over-thermal, over-load, over-current, over-voltage, and
over-displacement of the vibration tester;
Electrical network protection devices for over-voltage, under-voltage, lacking phase;
Drive power , current-limiting , soft-start, over-temperature, short-current,module fault protecting
(5) Can complete sine ,random , impact environmental tests
(6) This system has little requires for voltage fluctuation, ≤±10% is OK
(7) This system has little requires for Grounding resistance, ≤4Ω is OK
(8) High reliability, especially suitable for long-time running
Features:
1. Well designed dynamic circle skeleton, with a higher stage axial resonance frequency.
2. Two magnetic circuit, magnetic flux leakage low, compact structure and rational.
3. Rocker Rod roller bearings straight and import-oriented composite body stiffness orientation, eccentric load capacity.
4. Trunnion isolation foundation dedicated to hormone use, the installation of mobile convenience.
5. Advanced technology move around the system to ensure that the dynamic circle of high reliability.
6. New duct design and enhance the cooling effect.
7. Static stiffness, dynamic stiffness of the bearing small balloon, raising the vibration table capacity,
improve low-frequency performance.
Digital Vibration Controller
Vibration controller is the latest design by our company
that adopts international advanced distributed system
architecture, and its core is the latest TMS320 series
32-bit floating-point high-speed processor of TI
company. Test report is automatically generated in
Microsoft Word. During or after the testing, the
test report can be edited, and then generated
automatically or manually.
Hardware Specification
Input:
(1)2 channels
(2)Resolution : 24-bit analog-to-digital conversion (ADC)
(3)Input impedance : 220 k
(4) Built-in charge amplifier and ICP constant-current source, the voltage & ICP acceleration sensor can be directly connected
(5)Signal to noise ratio: >100dB
Output:
(1)1 channel
(2) Resolution : 16-bit digital-to-analog conversion (DAC)
(3)Amplitude accuracy: 2mV
(4) Output impedance : 30
Controlling Software Specification
Sinusoidal performance index
(1)Control Mode : sinusoidal waveform controlling
(2) Frequency Range: 1.0 to 5000hz ( 1.0 to 12000hz is optional)
(3)Control Dynamic Range : 100dB
(4)Closed-Loop Time: 10ms
(5)Control Accuracy: ±1dB
(6) Frequency Resolution: 0.01%
(7) Sweep Velocity: linear sweep 0 to 6000hz/s; logarithmic sweep 0 ~ 100 Oct/min
(8)Wave Distortion: <0.3%
Random Wave
(1)Control Mode : PSD
(2)Frequency Range: DC to 4800Hz,(DC to 11000Hz is optional)
(3)Resolution: Max.1600 lines
(4)Control Dynamic Range : 90dB
(5)Closed-Loop Time: typically 100ms
(6)Control Accuracy: ±1dB
| Electrodynamic Vibration Test System Technical Parameters | |||||||||
| Model |
Rated Sine Force (N) |
Rated Random Force (N) |
Frequency Range (Hz) |
Rated Acceleration (m/s2) |
Rated Speed (m/s) |
Rated displacement (p-p)mm |
Max. Loading ( Kg) |
Moving coil(Kg) |
Dimension of Moving coil (mm) |
| ES-1 | 1000 | 1000 | 3-3500 | 400 | 1.2 | 25 | 70 | 2.5 | Φ150 |
| ES-2 | 2000 | 2000 | 3-3500 | 800 | 1.6 | 25 | 70 | 2.5 | Φ150 |
| ES-2a | 2000 | 2000 | 3-3500 | 300 | 1.6 | 40 | 70 | 8 | Φ230 |
| ES-3 | 3000 | 3000 | 3-3500 | 1000 | 1.6 | 25 | 100 | 3.5 | Φ150 |
| ES-3a | 3000 | 3000 | 3-3500 | 400 | 1.6 | 40 | 120 | 9 | Φ230 |
| ES-6 | 6000 | 6000 | 3-3500 | 1000 | 1.6 | 25 | 180 | 6.5 | Φ230 |
| ES-6a | 6000 | 6000 | 3-3500 | 1000 | 1.6 | 51 | 250 | 12 | Φ230 |
| ES-10 | 10000 | 10000 | 3-3000 | 1000 | 1.8 | 51 | 270 | 14 | Φ240 |
| ES-20 | 20000 | 20000 | 3-3000 | 1000 | 1.8 | 51 | 300 | 30 | Φ320 |
| ES-30 | 30000 | 30000 | 3-2800 | 1000 | 1.8 | 5l | 450 | 40 | Φ450 |
| ES-40 | 40000 | 40000 | 3-2800 | 1000 | 1.8 | 51 | 500 | 50 | Φ450 |
| ES-50 | 50000 | 50000 | 3-2700 | 1000 | 1.8 | 51 | 750 | 50 | Φ450 |
| ES-60 | 60000 | 60000 | 3-2700 | 1000 | 1.8 | 51 | 750 | 60 | Φ450 |
| ES-100 | 100000 | 100000 | 3-2500 | 1000 | 1.8 | 51 | 1000 | 90 | Φ450 |
| ES-120 | 120000 | 120000 | 3-2200 | 1000 | 1.8 | 51 | 1100 | 90 | Φ500 |
| ES-160 | 160000 | 160000 | 3-2100 | 1000 | 1.8 | 51 | 1500 | 150 | Φ600 |
| ES-200 | 200000 | 200000 | 3-2000 | 1000 | 1.8 | 51 | 2500 | 200 | Φ650 |
| ES-350 | 350000 | 350000 | 3-1700 | 1000 | 1.8 | 51 | 4500 | 300 | Φ870 |
