High speed NC servo feeding machine
Features:
1. High precision feeding: Aiming at the arrival of hi-tech industry, it is controlled by computer closed-circuit feedback system. So that the precision can maintain within +/-0.03mm.
2. Phase-style feeding function: It can input 20 groups of different feeding length, each group provides punching for 999 times to satisfy the processing and production of special products (option)
3. Manual model: It can input 3 phases manual speed, which can let used operate more easily and feed materials more accuracy.
4. High efficiency release device: It can set up release angle quickly, only mact CAM signal of and adjusted feed thickness can done.
5. Feeding length setting: Input feed length on the controller panel directly.
6. Feeding unit: The roll adopts middle-hollow style. Being light and with low inertia for electroplate. The surface hardness HRC is 60 and hard chrome plated.
Features:
1. High precision feeding: Aiming at the arrival of hi-tech industry, it is controlled by computer closed-circuit feedback system. So that the precision can maintain within +/-0.03mm.
2. Phase-style feeding function: It can input 20 groups of different feeding length, each group provides punching for 999 times to satisfy the processing and production of special products (option)
3. Manual model: It can input 3 phases manual speed, which can let used operate more easily and feed materials more accuracy.
4. High efficiency release device: It can set up release angle quickly, only mact CAM signal of and adjusted feed thickness can done.
5. Feeding length setting: Input feed length on the controller panel directly.
6. Feeding unit: The roll adopts middle-hollow style. Being light and with low inertia for electroplate. The surface hardness HRC is 60 and hard chrome plated.
| Model |
NCF-100 NCF-100A |
NCF-200 NCF-200A |
NCF-300 NCF-300A |
NCF-400 NCF-400A |
NCF-500 NCF-500A |
NCF-600 NCF-600A |
NCF-700 NCF-700A |
NCF-800 NCF-800A |
NCF-1000 NCF-1000A |
NCF-1300 NCF-1300A |
NCF-1600 NCF-1600A |
|
|
Standard type Material Thickness(mm) |
0.2-3.2 | |||||||||||
| Material width for different thickness | 0.2-1.0 | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 1000 | 1300 | 1600 |
| 2.0 | 90 | 180 | 280 | 300 | 350 | 400 | 450 | 480 | 550 | 650 | 700 | |
| 3.2 | 40 | 80 | 100 | 120 | 150 | 180 | 210 | 240 | 280 | 320 | 360 | |
|
A type Material Thickness (mm) |
0.3-4.5 | |||||||||||
| Material width for different thickness | 0.3-2.2 | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 1000 | 1300 | 1600 |
| 3.2 | 80 | 160 | 240 | 320 | 400 | 460 | 520 | 560 | 580 | 600 | 650 | |
| 4.5 | 50 | 120 | 150 | 220 | 250 | 280 | 300 | 320 | 350 | 360 | 380 | |
| Feed length (mm) | 9999.99 | |||||||||||
| Feed speed (m/min) | 20 | |||||||||||
|
Servo Motor (KW) Standard type |
AC0.4 | AC0.75 | AC0.85 | AC1.3 | AC1.3 | AC1.8 | AC1.8 | AC2.9 | AC4.4 | AC5.5 | AC7.5 | |
|
Servo Motor (KW) A type |
AC1.3 | AC1.3 | AC1.8 | AC2.9 | AC2.9 | AC2.9 | AC2.9 | AC4.4 | AC5.5 | AC7.5 | AC11 | |
|
Power supply Standard type |
220V/Single-phase | 380V/415V 3-phase | ||||||||||
|
Power supply A type |
380V/415V 3-phase | |||||||||||
| Pass line height(mm) | 70-170 | 90-190 | ||||||||||
