The draw press is unique in its class. It make sure that you can easily slide garments on and off your heat press without burning your arms and hands. This innovative press combines the features that most like in a swinger, with the space saving advantage of a clamshell. However, instead of swinging to the right, the lower table is pulled out on a precision ball bearing slide. For some, this ability makes it more desirable than even a swing-away.
Feature:
New slide-out design
Floating upper platen & Rigid lower platen
Digital time, temperature and pressure controls
Teflon coated upper heat platen
Wide opening for easy layout
1 year warranty on entire press
CE Approved
Specifications:
Voltage: 100-120V/220-240V
Power: 1200W/1800W
Heat platen: 15''*15'', 16''*20'', 16''*24''
Temperature range: 0-225 degree
Time range: 0-480 senconds
Gross weght: 34kg/40kg/46kg
Package size: 72*50*53cm(SHP-15SP2S), 74*60*50cm(SHP-20SP2S), 76*62*55cm(SHP-24SP2S)
Anti-rust Handling: All the iron parts of our machine are anti-rust handled before using them to produce machine. In this way, all our machines are rusty free for more than one year, even in a very wet environment.
Baked onTeflon Coat: All the heat platens are baked on Teflon coat in High-tempearture Industrial Oven under 200 degree Celsius for 30 minutes. Make sure the platens are Scratch-resistant and long usage life.
Heat Platen Test: Each Signle Copper sheathed heating rod is tested before it is cast in an aluminum alloy or Mica Sheet. These heating rods are comparable to those found in industrial ovens that heat up quickly, work efficiently and last many years. With our industrial quality heat castings, you can get five years worry free warranty.
Quality Control on Finished Machine: All Microtec heat presses are strictly tested under the following procedures before shipping out.
Step 1: Turn on the machine, let it heating up to 200 degree Celsius.
Step 2: Keep the temperature stay at 200 degree Celsius for at least 20 minutes.
Package: All the machines are packed in two boxes with full wrapped styofoam and there are manual instructure offered for each set of machine.
Feature:
New slide-out design
Floating upper platen & Rigid lower platen
Digital time, temperature and pressure controls
Teflon coated upper heat platen
Wide opening for easy layout
1 year warranty on entire press
CE Approved
Specifications:
Voltage: 100-120V/220-240V
Power: 1200W/1800W
Heat platen: 15''*15'', 16''*20'', 16''*24''
Temperature range: 0-225 degree
Time range: 0-480 senconds
Gross weght: 34kg/40kg/46kg
Package size: 72*50*53cm(SHP-15SP2S), 74*60*50cm(SHP-20SP2S), 76*62*55cm(SHP-24SP2S)
Anti-rust Handling: All the iron parts of our machine are anti-rust handled before using them to produce machine. In this way, all our machines are rusty free for more than one year, even in a very wet environment.
Baked onTeflon Coat: All the heat platens are baked on Teflon coat in High-tempearture Industrial Oven under 200 degree Celsius for 30 minutes. Make sure the platens are Scratch-resistant and long usage life.
Heat Platen Test: Each Signle Copper sheathed heating rod is tested before it is cast in an aluminum alloy or Mica Sheet. These heating rods are comparable to those found in industrial ovens that heat up quickly, work efficiently and last many years. With our industrial quality heat castings, you can get five years worry free warranty.
Quality Control on Finished Machine: All Microtec heat presses are strictly tested under the following procedures before shipping out.
Step 1: Turn on the machine, let it heating up to 200 degree Celsius.
Step 2: Keep the temperature stay at 200 degree Celsius for at least 20 minutes.
Package: All the machines are packed in two boxes with full wrapped styofoam and there are manual instructure offered for each set of machine.
