1.Solar panel : 5V /100MA
2. Battery Type: Li-Polymer Battery
3. Battery Capacity: 4000mAh
4. Input Charging Voltage/Current : 5V/1A (Micro-B USB Input Socket)
5. Output Charging Voltage/Current: 2.1A
solar charger, power bank, mobile charger, mobile phone charger, battery charger, USB charger
Feature
1.When traveling on hang mobile power pack rechargeable, hook inside is the silicone ring, prevent wear mobile power.
2.USB port with silica gel protection cover, have very good waterproof and dustproof effect.
3.Shell is made by environmental protection material rubber and silicone, have the effect of drop and vibration contro.
4.Both sides of the power supply is designed according to human hand shake hands, feeling comfortable ,and not easy to fall off.
5.PET laminated high conversion rate of monocrystalline silicon solar panels.
6.Safety Control: new polymer batteries, 4000 ma, new PCBA circuit boards, imported IC, with over charge and discharge protection.
7. Quickly identify: 1 solar charge indicator, 3 battery indicator lights (30%, 70%, 100%).
Operation
When the power button is pressed, the power bank will turn on, and the 4 LEDs will indicate the power bank's state of charge. 1 steady lit blue LED indicates the power bank has a 25% charge; 2 steady lit blue LEDs indicate a 50% charge; 3 steady lit blue LEDs indicate a 75% charge, and 4 steady lit blue LEDs indicate a 100% charge. The blue LEDs will only remain lit for several seconds after the power button is pressed and then they will turn off, provided an electronic device isn't plugged into one of the regular (type A) USB output sockets and actively charging. It is important to note that the power bank must first be turned on in order to charge a device that is plugged into one of the regular (type A) USB output sockets. In other words, it is necessary to turn the power bank on in order to charge an electronic device. If an electronic device is connected to the power bank and charging, and you want to turn the power bank off, simply press and hold the power button for a few seconds until the blue LEDs turns off.
When the ambient lighting is bright enough to charge the power bank, the left-most LED will illuminate a steady green to indicate that it is charging. This power bank can charge from bright ambient room lighting and can even charge on a cloudy day. It may not charge if something is blocking part of the solar panel like an article of clothing, etc. This power bank can be charged from the built-in solar panel while it is charging a cell phone or other electronic device, and the left-most LED will illuminate a steady green to indicate charging. Note, this power bank will automatically turn off when charging from an external power source via the micro-B USB input socket, so charging of a cell phone or other electronic device is not possible during this time.
When the power bank is plugged into a power source, a blinking blue LED indicates that the power bank is in the process of charging to achieve that particular percent state of charge. For example, if 3 of the blue LEDs are steady lit, and the 4th blue LED is blinking, then the power bank has a 75% charge and is in the process of charging to achieve a 100% charge. Once all 4 blue LEDs are steady lit, then the power bank will have a 100% charge.
To turn the white LED flashlight on, press the power button twice quickly. To turn it off, press the power button twice quickly again. It is important to note that charging of an electronic device is still possible while the white LED flashlight is turned on.
Advantage
1. Waterproof IPX4 level
2. Super drop, shockproof, anti friction, dustproof function
3. 0.5W monocrystalline silicon PET laminate solar panels
4. Environmental protection silicone shell ABS + PC + plastic fire materials
5. Double USB output, emergency LED flashlight
6. Configuration mountaineering clasp, can be hung on the backpack
7. Suitable for iPhone, Android, iPad, camera, MP3/4, PSP and so on.
Product Description
Feature
1.When traveling on hang mobile power pack rechargeable, hook inside is the silicone ring, prevent wear mobile power.
2.USB port with silica gel protection cover, have very good waterproof and dustproof effect.
3.Shell is made by environmental protection material rubber and silicone, have the effect of drop and vibration contro.
4.Both sides of the power supply is designed according to human hand shake hands, feeling comfortable ,and not easy to fall off.
5.PET laminated high conversion rate of monocrystalline silicon solar panels.
6.Safety Control: new polymer batteries, 4000 ma, new PCBA circuit boards, imported IC, with over charge and discharge protection.
7. Quickly identify: 1 solar charge indicator, 3 battery indicator lights (30%, 70%, 100%).
Operation
When the power button is pressed, the power bank will turn on, and the 4 LEDs will indicate the power bank's state of charge. 1 steady lit blue LED indicates the power bank has a 25% charge; 2 steady lit blue LEDs indicate a 50% charge; 3 steady lit blue LEDs indicate a 75% charge, and 4 steady lit blue LEDs indicate a 100% charge. The blue LEDs will only remain lit for several seconds after the power button is pressed and then they will turn off, provided an electronic device isn't plugged into one of the regular (type A) USB output sockets and actively charging. It is important to note that the power bank must first be turned on in order to charge a device that is plugged into one of the regular (type A) USB output sockets. In other words, it is necessary to turn the power bank on in order to charge an electronic device. If an electronic device is connected to the power bank and charging, and you want to turn the power bank off, simply press and hold the power button for a few seconds until the blue LEDs turns off.
When the ambient lighting is bright enough to charge the power bank, the left-most LED will illuminate a steady green to indicate that it is charging. This power bank can charge from bright ambient room lighting and can even charge on a cloudy day. It may not charge if something is blocking part of the solar panel like an article of clothing, etc. This power bank can be charged from the built-in solar panel while it is charging a cell phone or other electronic device, and the left-most LED will illuminate a steady green to indicate charging. Note, this power bank will automatically turn off when charging from an external power source via the micro-B USB input socket, so charging of a cell phone or other electronic device is not possible during this time.
When the power bank is plugged into a power source, a blinking blue LED indicates that the power bank is in the process of charging to achieve that particular percent state of charge. For example, if 3 of the blue LEDs are steady lit, and the 4th blue LED is blinking, then the power bank has a 75% charge and is in the process of charging to achieve a 100% charge. Once all 4 blue LEDs are steady lit, then the power bank will have a 100% charge.
To turn the white LED flashlight on, press the power button twice quickly. To turn it off, press the power button twice quickly again. It is important to note that charging of an electronic device is still possible while the white LED flashlight is turned on.
Advantage
1. Waterproof IPX4 level
2. Super drop, shockproof, anti friction, dustproof function
3. 0.5W monocrystalline silicon PET laminate solar panels
4. Environmental protection silicone shell ABS + PC + plastic fire materials
5. Double USB output, emergency LED flashlight
6. Configuration mountaineering clasp, can be hung on the backpack
7. Suitable for iPhone, Android, iPad, camera, MP3/4, PSP and so on.
Product Description
1.Solar panel : 5V /100MA
2. Battery Type: Li-Polymer Battery
3. Battery Capacity: 4000mAh
4. Input Charging Voltage/Current : 5V/1A (Micro-B USB Input Socket)
5. Output Charging Voltage/Current: 2.1A
6. LED Charge Indicators : 1 x Green (Solar Charge Indicator)
4 x Blue (25%, 50%, 75%, 100% Battery Charge Indicat )
7. LED Flashlight : 1 x White LED Flashlight
8. Housing Shape/Material : Rectangular/ABS & Rubber
9. Dimension: 141*86*13mm
10. Charge/Discharge Cycles : ≥ 500
11. Weight: 140g
12. Color: Black, yellow, blue, green,
13. Packing : 90 pcs/carton Carton Size : 140X195X25mm G..W : 19KG
5. Output Charging Voltage/Current: 2.1A
6. LED Charge Indicators : 1 x Green (Solar Charge Indicator)
4 x Blue (25%, 50%, 75%, 100% Battery Charge Indicat )
7. LED Flashlight : 1 x White LED Flashlight
8. Housing Shape/Material : Rectangular/ABS & Rubber
9. Dimension: 141*86*13mm
10. Charge/Discharge Cycles : ≥ 500
11. Weight: 140g
12. Color: Black, yellow, blue, green,
13. Packing : 90 pcs/carton Carton Size : 140X195X25mm G..W : 19KG
2. Battery Type: Li-Polymer Battery
3. Battery Capacity: 4000mAh
4. Input Charging Voltage/Current : 5V/1A (Micro-B USB Input Socket)
5. Output Charging Voltage/Current: 2.1A
solar charger, power bank, mobile charger, mobile phone charger, battery charger, USB charger
Feature
1.When traveling on hang mobile power pack rechargeable, hook inside is the silicone ring, prevent wear mobile power.
2.USB port with silica gel protection cover, have very good waterproof and dustproof effect.
3.Shell is made by environmental protection material rubber and silicone, have the effect of drop and vibration contro.
4.Both sides of the power supply is designed according to human hand shake hands, feeling comfortable ,and not easy to fall off.
5.PET laminated high conversion rate of monocrystalline silicon solar panels.
6.Safety Control: new polymer batteries, 4000 ma, new PCBA circuit boards, imported IC, with over charge and discharge protection.
7. Quickly identify: 1 solar charge indicator, 3 battery indicator lights (30%, 70%, 100%).
Operation
When the power button is pressed, the power bank will turn on, and the 4 LEDs will indicate the power bank's state of charge. 1 steady lit blue LED indicates the power bank has a 25% charge; 2 steady lit blue LEDs indicate a 50% charge; 3 steady lit blue LEDs indicate a 75% charge, and 4 steady lit blue LEDs indicate a 100% charge. The blue LEDs will only remain lit for several seconds after the power button is pressed and then they will turn off, provided an electronic device isn't plugged into one of the regular (type A) USB output sockets and actively charging. It is important to note that the power bank must first be turned on in order to charge a device that is plugged into one of the regular (type A) USB output sockets. In other words, it is necessary to turn the power bank on in order to charge an electronic device. If an electronic device is connected to the power bank and charging, and you want to turn the power bank off, simply press and hold the power button for a few seconds until the blue LEDs turns off.
When the ambient lighting is bright enough to charge the power bank, the left-most LED will illuminate a steady green to indicate that it is charging. This power bank can charge from bright ambient room lighting and can even charge on a cloudy day. It may not charge if something is blocking part of the solar panel like an article of clothing, etc. This power bank can be charged from the built-in solar panel while it is charging a cell phone or other electronic device, and the left-most LED will illuminate a steady green to indicate charging. Note, this power bank will automatically turn off when charging from an external power source via the micro-B USB input socket, so charging of a cell phone or other electronic device is not possible during this time.
When the power bank is plugged into a power source, a blinking blue LED indicates that the power bank is in the process of charging to achieve that particular percent state of charge. For example, if 3 of the blue LEDs are steady lit, and the 4th blue LED is blinking, then the power bank has a 75% charge and is in the process of charging to achieve a 100% charge. Once all 4 blue LEDs are steady lit, then the power bank will have a 100% charge.
To turn the white LED flashlight on, press the power button twice quickly. To turn it off, press the power button twice quickly again. It is important to note that charging of an electronic device is still possible while the white LED flashlight is turned on.
Advantage
1. Waterproof IPX4 level
2. Super drop, shockproof, anti friction, dustproof function
3. 0.5W monocrystalline silicon PET laminate solar panels
4. Environmental protection silicone shell ABS + PC + plastic fire materials
5. Double USB output, emergency LED flashlight
6. Configuration mountaineering clasp, can be hung on the backpack
7. Suitable for iPhone, Android, iPad, camera, MP3/4, PSP and so on.
Product Description
Feature
1.When traveling on hang mobile power pack rechargeable, hook inside is the silicone ring, prevent wear mobile power.
2.USB port with silica gel protection cover, have very good waterproof and dustproof effect.
3.Shell is made by environmental protection material rubber and silicone, have the effect of drop and vibration contro.
4.Both sides of the power supply is designed according to human hand shake hands, feeling comfortable ,and not easy to fall off.
5.PET laminated high conversion rate of monocrystalline silicon solar panels.
6.Safety Control: new polymer batteries, 4000 ma, new PCBA circuit boards, imported IC, with over charge and discharge protection.
7. Quickly identify: 1 solar charge indicator, 3 battery indicator lights (30%, 70%, 100%).
Operation
When the power button is pressed, the power bank will turn on, and the 4 LEDs will indicate the power bank's state of charge. 1 steady lit blue LED indicates the power bank has a 25% charge; 2 steady lit blue LEDs indicate a 50% charge; 3 steady lit blue LEDs indicate a 75% charge, and 4 steady lit blue LEDs indicate a 100% charge. The blue LEDs will only remain lit for several seconds after the power button is pressed and then they will turn off, provided an electronic device isn't plugged into one of the regular (type A) USB output sockets and actively charging. It is important to note that the power bank must first be turned on in order to charge a device that is plugged into one of the regular (type A) USB output sockets. In other words, it is necessary to turn the power bank on in order to charge an electronic device. If an electronic device is connected to the power bank and charging, and you want to turn the power bank off, simply press and hold the power button for a few seconds until the blue LEDs turns off.
When the ambient lighting is bright enough to charge the power bank, the left-most LED will illuminate a steady green to indicate that it is charging. This power bank can charge from bright ambient room lighting and can even charge on a cloudy day. It may not charge if something is blocking part of the solar panel like an article of clothing, etc. This power bank can be charged from the built-in solar panel while it is charging a cell phone or other electronic device, and the left-most LED will illuminate a steady green to indicate charging. Note, this power bank will automatically turn off when charging from an external power source via the micro-B USB input socket, so charging of a cell phone or other electronic device is not possible during this time.
When the power bank is plugged into a power source, a blinking blue LED indicates that the power bank is in the process of charging to achieve that particular percent state of charge. For example, if 3 of the blue LEDs are steady lit, and the 4th blue LED is blinking, then the power bank has a 75% charge and is in the process of charging to achieve a 100% charge. Once all 4 blue LEDs are steady lit, then the power bank will have a 100% charge.
To turn the white LED flashlight on, press the power button twice quickly. To turn it off, press the power button twice quickly again. It is important to note that charging of an electronic device is still possible while the white LED flashlight is turned on.
Advantage
1. Waterproof IPX4 level
2. Super drop, shockproof, anti friction, dustproof function
3. 0.5W monocrystalline silicon PET laminate solar panels
4. Environmental protection silicone shell ABS + PC + plastic fire materials
5. Double USB output, emergency LED flashlight
6. Configuration mountaineering clasp, can be hung on the backpack
7. Suitable for iPhone, Android, iPad, camera, MP3/4, PSP and so on.
Product Description
1.Solar panel : 5V /100MA
2. Battery Type: Li-Polymer Battery
3. Battery Capacity: 4000mAh
4. Input Charging Voltage/Current : 5V/1A (Micro-B USB Input Socket)
5. Output Charging Voltage/Current: 2.1A
6. LED Charge Indicators : 1 x Green (Solar Charge Indicator)
4 x Blue (25%, 50%, 75%, 100% Battery Charge Indicat )
7. LED Flashlight : 1 x White LED Flashlight
8. Housing Shape/Material : Rectangular/ABS & Rubber
9. Dimension: 141*86*13mm
10. Charge/Discharge Cycles : ≥ 500
11. Weight: 140g
12. Color: Black, yellow, blue, green,
13. Packing : 90 pcs/carton Carton Size : 140X195X25mm G..W : 19KG
5. Output Charging Voltage/Current: 2.1A
6. LED Charge Indicators : 1 x Green (Solar Charge Indicator)
4 x Blue (25%, 50%, 75%, 100% Battery Charge Indicat )
7. LED Flashlight : 1 x White LED Flashlight
8. Housing Shape/Material : Rectangular/ABS & Rubber
9. Dimension: 141*86*13mm
10. Charge/Discharge Cycles : ≥ 500
11. Weight: 140g
12. Color: Black, yellow, blue, green,
13. Packing : 90 pcs/carton Carton Size : 140X195X25mm G..W : 19KG
