1. Same natures with air bubble film machines.
2. Through twice laminate, it can produce7 layers air bubble aluminum film and 5 layers air bubble film.
3. Adopting Japan import"nano"technology to adjust, anti high temperature silica rubber roller film laminate, rubber roller unable to happen adhibit film phenomenon, pressing film smoothly, good laminate result to the brown paper and alunimum film.
4. With different demands of clients, be able to specially produce five or seven layers air bubble aluminized film machines between 800~1800mm.
5. Forming principle of five-layer air bubble aluminized film:
Plasticization system I: To melt, plasticize raw materials and be extruded
Heat film extrusion system I: Two layers high temperature film is formed
Molding and laminating heat vacuum air bubble film
Two-layer film being extruded again under heat situation after laminating pre-heat the coating aluminum foil
Aluminized film rolling material I
Cooling
Pre-heat of laminated film
Plasticization system II: To melt, plasticize raw materials and be extruded
Heat film extrusion system II: One layer high temperature film is formed
Laminate three-layer air bubble aluminized film with PE plane layer and aluminum foil into five-layer air bubble aluminized film
Aluminized film rolling material II
Cutting wastes
Collecting and recycling waste
Five-layer air bubble aluminized film is formed.
2. Through twice laminate, it can produce7 layers air bubble aluminum film and 5 layers air bubble film.
3. Adopting Japan import"nano"technology to adjust, anti high temperature silica rubber roller film laminate, rubber roller unable to happen adhibit film phenomenon, pressing film smoothly, good laminate result to the brown paper and alunimum film.
4. With different demands of clients, be able to specially produce five or seven layers air bubble aluminized film machines between 800~1800mm.
5. Forming principle of five-layer air bubble aluminized film:
Plasticization system I: To melt, plasticize raw materials and be extruded
Heat film extrusion system I: Two layers high temperature film is formed
Molding and laminating heat vacuum air bubble film
Two-layer film being extruded again under heat situation after laminating pre-heat the coating aluminum foil
Aluminized film rolling material I
Cooling
Pre-heat of laminated film
Plasticization system II: To melt, plasticize raw materials and be extruded
Heat film extrusion system II: One layer high temperature film is formed
Laminate three-layer air bubble aluminized film with PE plane layer and aluminum foil into five-layer air bubble aluminized film
Aluminized film rolling material II
Cutting wastes
Collecting and recycling waste
Five-layer air bubble aluminized film is formed.
| model | MX-B120FA | MX-B150FA | MX-B150SA |
| Screw diameter (mm) | Φ 75 | Φ 75 | Φ 75 |
| Ways of changing net | simple | ||
| Width (mm) | 1250 | 1530 | 1530 |
| Max output (kg/hr) | 140 | 170 | 220 |
| Max effciency (m/hr) | 1000 | 900 | 900 |
| Total power (kw) | 105 | 118 | 186 |
| Consumption power (kw) | 50-70 | 60-80 | 85-130 |
| Layer | 3 or 5 | 3 or 5 | 5 or 7 |
| Weight (kg) | 6500 | 7300 | 12000 |
