Exturder can provide a good plasticizing effect and a high quality products. Optimizedly design the die, scientific and rational design the flow, no dead ends. Mold of high precision, material flow distribut to ensure the film has good thickness tolerances. New and efficient cooling effect and bubble stability, thus ensuring a high yield and good thickness tolerances. Blown film winding unit can form to ensure the film smoothly and constant tension.
| model | FM3-2200 |
| suitable material | LDPE/LLDPE/HDPE |
| thickness | 0.02--0.20mm |
| film width | 2100mm |
| max output | 180kg/h |
| screw diameter | Φ65mm*3 |
| material screw and barrel | 38CrMoAIA |
| gear box | 180*3 |
| L/D ratio | 30:1 |
| temp. controller | 3 zone |
| barrel cooling | 120w*2 |
| driving motor | 22kw*3 |
| inverter | 22kw*3 |
| die diameter | Φ600mm |
| air ring diameter | Φ900mm |
| die structure | spiral mandrel die chrome plated surface 40Cr |
| temp. controller | 2 zone |
| cooling fan | 4kw |
| take up width | 2200mm |
| effective take up width | 2100mm |
| take up motor | 2.2kw |
| take up speed | 0--80m/min |
| winder width | 2200mm |
| effective winder width | 2100mm |
| max winding diameter | 400mm |
| winder type | single winder |
| winder motor power | 100kgf.cm |
| machine size(m) | 8.0*3.75*7.5 |
| voltage | 380V 50Hz 3Phase |
auto winder:
auto-loader device:
air cylinder auto fast change net
