Bottled Hot Beverage Filling Machine for Juice with pulp
Application
This series machine integrates washing, filling and capping into one unit. It can be used for hot-filling production of different kinds of fruit juice, tea drink, etc. This series machine can be also used for the filling of purified and mineral water.
Feature
1. The suspending bottle-neck clamping design make the bottle stable during the high-speed moving conditions. By changing a few parts, it can meet the need of production of different types of bottles easily.
2. The special stainless steel clip is adopted and the clip will not contact the area above the bottle's screw thread. Nozzle is in the clip can guarantee the complete wash of the interior of the bottle.
3. The advanced micro filing technology used in this machine make the filling quickly, steady and accurate. The beverage-holding tank is fully closed and also, temperature-control device and CIP washing interface are installed.
4. The machine can meet all the technical requirements for hot-filling below 95. And before capping, bottle mouth will be cleaned by RO washing device.
5. Magnetic torque is used for screw capping. And the power of screw capping can be adjusted freely. Capping is reliable and will not harm the caps.
6. Advanced technologies, such as human-machine interface touch-screen and PLC program control are adopted in this machine.
7. All parts that contact with the liquid are made of high quality stainless steel. The critical electrical components such as the decelerators, the motor are all from famous international companies.
We also can supply the whole line of fruit juice plant.
Any more information, pls feel free to contact us.
Application
This series machine integrates washing, filling and capping into one unit. It can be used for hot-filling production of different kinds of fruit juice, tea drink, etc. This series machine can be also used for the filling of purified and mineral water.
Feature
1. The suspending bottle-neck clamping design make the bottle stable during the high-speed moving conditions. By changing a few parts, it can meet the need of production of different types of bottles easily.
2. The special stainless steel clip is adopted and the clip will not contact the area above the bottle's screw thread. Nozzle is in the clip can guarantee the complete wash of the interior of the bottle.
3. The advanced micro filing technology used in this machine make the filling quickly, steady and accurate. The beverage-holding tank is fully closed and also, temperature-control device and CIP washing interface are installed.
4. The machine can meet all the technical requirements for hot-filling below 95. And before capping, bottle mouth will be cleaned by RO washing device.
5. Magnetic torque is used for screw capping. And the power of screw capping can be adjusted freely. Capping is reliable and will not harm the caps.
6. Advanced technologies, such as human-machine interface touch-screen and PLC program control are adopted in this machine.
7. All parts that contact with the liquid are made of high quality stainless steel. The critical electrical components such as the decelerators, the motor are all from famous international companies.
We also can supply the whole line of fruit juice plant.
Any more information, pls feel free to contact us.
| Model | JND-8-8-3R | JND-16-12-6R | JND-18-18-6R | JND-24-24-8R |
|
Production capacity (bph)(500ml) |
1500-2000 | 3000-4000 | 4000-5000 | 6000-8000 |
| Applicable bottle type |
Bottle diameter 50-100mm; height 150-320mm; volume 250-2000ml |
Bottle diameter 50-100mm; height 150-320mm; volume 250-2000ml |
Bottle diameter 50-100mm; height 150-320mm; volume 250-2000ml |
Bottle diameter 50-100mm; height 150-320mm; volume 250-2000ml |
| Applicable cap type |
Plastic screw cap or special order |
Plastic screw cap or special order |
Plastic screw cap or special order |
Plastic screw cap or special order |
| Gas source pressure(Mpa) | 0.6 | |||
| Gas Consumption(M3/Min) | 0.2 | 0.25 | 0.3 | 0.4 |
| Total Power(KW) | 4.0 | 4.8 | 50.3 | 6.4 |
