Acrylic bending machine
Function Introduction
Bending machine is widely used for bending the materials like acrylic, plastic, PC, PVC and PP. The machine bends the materials into different angles by heating up the materials with single or multi tube heaters. This machine is fast and precise. Working plateforms are cooled by water cooling system for the best result, highest efficiency and precise angle forming. The adjustable temperture works out for different materials correctly without over heating causing bubbles and undesirable curves. This is an ideal machine for the acrylic and plastic works.
1, Height adjustable device for bottom heater
2, Aadjustable heating width
3, Digital thermostat for bottom heater
4, Water cooling bending table
Function Introduction
Bending machine is widely used for bending the materials like acrylic, plastic, PC, PVC and PP. The machine bends the materials into different angles by heating up the materials with single or multi tube heaters. This machine is fast and precise. Working plateforms are cooled by water cooling system for the best result, highest efficiency and precise angle forming. The adjustable temperture works out for different materials correctly without over heating causing bubbles and undesirable curves. This is an ideal machine for the acrylic and plastic works.
1, Height adjustable device for bottom heater
2, Aadjustable heating width
3, Digital thermostat for bottom heater
4, Water cooling bending table
| Model | Main Power Input | Power | Bending Width | Cooling Systems(advantages) | Dimension | N. W. |
| Seron-600A | 220V | 1x600W tube heater | 65cm | Water Cooling only. Working platform is comparatively not as cool. | 100x40x110(cm) | 100KG |
| 50-60Hz | 3x1800W tube heaters | |||||
| Seron-1200A | 220V | 1x1000W tube heater | 126cm | 160x40x110(cm) | 180KG | |
| 50-60Hz | 3x3000W tube heaters | |||||
| Seron-600AF | 220V | 1x600W tube heater | 65cm | Dual Cooling System (Water Cooling and Air Cooling) makes the temperature of the working platform stay constantly low which shortens the plastic sheets forming time and avoid curving for best result and efficiency. | 100x40x110(cm) | 105KG |
| 50-60Hz | 3x1800W tube heaters | |||||
| Seron-1200AF | 220V | 1x1000W tube heater | 126cm | 160x40x110(cm) | 185KG | |
| 50-60Hz | 3x3000W tube heaters | |||||
| Seron-1800AF | 380V | 1x1500W tube heater | 186cm | 220x40x110(cm) | 240KG | |
| 50-60Hz | 3x4500W tube heaters | |||||
| Seron-2400AF | 380V | 1x2000W tube heater | 240cm | 280x40x110(cm) | 260KG | |
| 50-60Hz | 3x6000W tube heaters | |||||
| Seron-1200AC | 220V | 1x1000W tube heater | 126cm | Use of industrial compressor cooling system, the temperature of the working platform is adjustable between 5° C-25° C. The cool working platform hence allows the products to form quickly and nicely achieving much shorter processing time and best forming for the very best result and highest efficiency. | 160x40x110(cm) | 200KG |
| 50-60Hz | 3x3000W tube heaters | |||||
| Seron-1800AC | 380V | 1x1500W tube heater | 186cm | 220x40x110(cm) | 270KG | |
| 50-60Hz | 3x4500W tube heaters | |||||
| Seron-2400AC | 380V | 1x2000W tube heater | 240cm | 280x40x110(cm) | 290KG | |
| 50-60Hz | 3x6000W tube heaters |
