DongGuan TUSA Precision Tools Manufacture Co., Ltd. Is an Electronic clock, Mould, Car, Professional R&D design tools, Gathering production, sales, after-sales service as one factory.
The equipments and testing equipments. The manufacture of steam and Germany professional the car engine tool WOLF group as a strategic and cooperative relations, The introduction of it advanced design break through traditional concept and technology. To providing the best products and services for our customers and partners
The equipments and testing equipments. The manufacture of steam and Germany professional the car engine tool WOLF group as a strategic and cooperative relations, The introduction of it advanced design break through traditional concept and technology. To providing the best products and services for our customers and partners
| WEIX45HRC Square series - 2F | ||||
| © WC=0.8(UM)Co=10 HRA=92.2 HV=1620 Rupture=4200(kg.N/mm²) | ||||
| Mode | FD Flute Dia | SD Flute Dia | FL Flute Length | TL Total Length |
| WEIX601 TIALN | 3 | 3 | 8 | 50L |
| WEIX602 TIALN | 1 | 4 | 3 | 50L |
| WEIX603 TIALN | 1.5 | 4 | 4 | 50L |
| WEIX604 TIALN | 2 | 4 | 5 | 50L |
| WEIX605 TIALN | 2.5 | 4 | 6 | 50L |
| WEIX606 TIALN | 3.5 | 4 | 10 | 50L |
| WEIX607 TIALN | 4 | 4 | 11 | 50L |
| WEIX608 TIALN | 5 | 5 | 13 | 50L |
| WEIX609 TIALN | 1 | 6 | 3 | 50L |
| WEIX610 TIALN | 1.5 | 6 | 4 | 50L |
| WEIX611 TIALN | 2 | 6 | 5 | 50L |
| WEIX612 TIALN | 2.5 | 6 | 6 | 50L |
| WEIX613 TIALN | 3 | 6 | 8 | 50L |
| WEIX614 TIALN | 3.5 | 6 | 10 | 50L |
| WEIX615 TIALN | 4 | 6 | 11 | 50L |
| WEIX616 TIALN | 5 | 6 | 13 | 50L |
| WEIX617 TIALN | 6 | 6 | 15 | 50L |
| WEIX618 TIALN | 7 | 8 | 17 | 60L |
| WEIX619 TIALN | 8 | 8 | 20 | 60L |
| WEIX620 TIALN | 10 | 10 | 25 | 75L |
| WEIX621 TIALN | 12 | 12 | 30 | 75L |
| WEIX622 TIALN | 14 | 14 | 35 | 100L |
| WEIX623 TIALN | 16 | 16 | 40 | 100L |
| WEIX624 TIALN | 18 | 18 | 40 | 100L |
| WEIX625 TIALN | 20 | 20 | 40 | 100L |
| Tungsten Carbide Blank Rods Grades | |||||||
| Grade | WC | Co | Density | Hardness | TRS | Impact Strength | Application |
| 45HRC | (um) | % | g/cm³ | HRA HV | kg.N/mm² | kg.f-m/cm² | For:drills,endmills,reamers, gravers used for processing stainless steel,nickel chromium alloy,steel titanium alloy,heat-treaded steel,cast iron,aluminum alloy ,pure aluminum,plastics graphite etc... |
| WX15 | 0.8 | 10 | 14.4 | 92.2 1620 | 4000 | 0.50 | |
| 50HRC | |||||||
| TR20 | 0.6 | 12 | 14.1 | 92.5 1680 | 4200 | 0.60 | |
| 55HRC | |||||||
| TS25 | 0.5 | 13 | 14.05 | 92.8 1690 | 4350 | 0.65 | |
| 65HRC | |||||||
| TS30 | 0.2 | 9 | 14 | 93.6 1890 | 4600 | 0.75 | |
