Product features
Glory laser develops and produce complete air cooling Fiber Optical Laser marking system in China. It is environmental friendly, low consumption, fully automatically and leading laser system. This creative laser system make the optical conversion rate up to 38%-50%, the air cooling can meet the system requirements, this laser system is small and compact size, fiber output, can flexibly make 3D processing system. The backward reflecting isolator, which uses the particularity of wavelength and direction of laser, and the spe cial structure inside the backward reflecting isolator can block the laser reflected by work piece, in order to avoid the laser enter the laser oscillator again to damage the laser oscillator.
Applications
It is widely used in: Electronic components industry, medical device industry, glasses watch and clock industry, IC card industry, plastic tool industry, mobile phone and PC keyboards, kitchen and bathroom appliance etc.
Translucent plastic buttons ,IC chips ,Digital Product components ,precision machinery ,Jewelry ,sanitary ware,measuring and cutting tools,watch glasses ,electrical applicance,electronic ocmpoments ,hardware accessories,hardware tools,mobile communications components ,automobile parts ,plastic products ,medical equipment ,building materials,pipes and other high -precision product marking .
Applicable Materials
Metals and a variety of non-metallic materials ,high hardnewss alloys,oxides,plating ,coating ,ABS,epoxy resin,ink ,plastic ,etc
Glory laser develops and produce complete air cooling Fiber Optical Laser marking system in China. It is environmental friendly, low consumption, fully automatically and leading laser system. This creative laser system make the optical conversion rate up to 38%-50%, the air cooling can meet the system requirements, this laser system is small and compact size, fiber output, can flexibly make 3D processing system. The backward reflecting isolator, which uses the particularity of wavelength and direction of laser, and the spe cial structure inside the backward reflecting isolator can block the laser reflected by work piece, in order to avoid the laser enter the laser oscillator again to damage the laser oscillator.
Applications
It is widely used in: Electronic components industry, medical device industry, glasses watch and clock industry, IC card industry, plastic tool industry, mobile phone and PC keyboards, kitchen and bathroom appliance etc.
Translucent plastic buttons ,IC chips ,Digital Product components ,precision machinery ,Jewelry ,sanitary ware,measuring and cutting tools,watch glasses ,electrical applicance,electronic ocmpoments ,hardware accessories,hardware tools,mobile communications components ,automobile parts ,plastic products ,medical equipment ,building materials,pipes and other high -precision product marking .
Applicable Materials
Metals and a variety of non-metallic materials ,high hardnewss alloys,oxides,plating ,coating ,ABS,epoxy resin,ink ,plastic ,etc
| Model | FOL-20A/20A/20F |
| Power | 20W |
| Wavelength | 1064nm |
| Beam quality | M 2 <1.5 |
| Output power | 10%~100%(continuously to be adjusted) |
| Output frequency | 20KHz~100KHz (continuously to be adjusted) |
| (8h)Power stability(8h) | <±1%rms |
| Focus spot diameter | <0.01mm |
| Marking type | Dynamic mark/static mark |
| Carving size | 110mm×110mm |
| Carving depth | ≤1.2mm |
| Carving speed | 800 standard characters/second |
| Minimum line width | 0.012mm |
| Minimum character | 0.15mm |
| Repeated accuracy | ±0.003mm |
| System operation environment | WindowsXP/2000/98 |
| Cooling mode | Air cooling |
| Temperature of operation environment | 15ºC~35ºC |
| Power requirement | 220V/single phase/50Hz/<400W |
| Life-span of laser module | 100000 Hrs |
| Packing size/Gross Weight | 750*350*560mm/60KGS |
