Laser cutting and drilling machine Working Principle:
Laser cutting and drilling machine is implemented upon the power with high power density generated by application of laser focusing. Under the control of computer, pulse enables the laser discharge and outputs the pulse laser with the repeated high frequency, thus forming the light beam of a certain frequency and pulse width. Through the light transmission and reflection, the pulse laser beam focuses on the processed surface through the focusing lens group, forming some tiny and high energy spots. Focus the spot on the near place to be processed, it will melt or gasify the processed materials with high temperature.
Features:
The laser cutting and punching machine is high-tech automatic equipment combined the laser technology with the numerical control technique, featured with the high efficiency, low cost, secure and stable performances. It can cut or punch the metal or non-metal plates and pipes, especially suitable for the punching and cutting of stainless plate, iron panel, silicon chip, ceramic plate and diamond, etc. Compared to the processing method on traditional plates, the laser cutting has more superior cutting quality, higher cutting speed, and more flexibility (can be cut to any shape), can be applied to wide range of materials.
Features of Laser Cutting:
Ø The cutting slot of laser is narrow, with tiny partial deformation, the work-piece has no mechanical deformation, and without
Tool abrasion.
Ø The laser cutting is a high energy, and density controlled non-contact processing method. The laser beam focuses to a
Small spot, enabling the narrow and no-blur cutting slot.
Ø The punching precise is high, and the sheet can achieve the 0.1 milli-pore, adopt the servo system to achieve the more
Precise cutting precision.
Ø Adopted the solid laser, the maintenance and usage cost will be low.
Laser cutting and drilling machine is implemented upon the power with high power density generated by application of laser focusing. Under the control of computer, pulse enables the laser discharge and outputs the pulse laser with the repeated high frequency, thus forming the light beam of a certain frequency and pulse width. Through the light transmission and reflection, the pulse laser beam focuses on the processed surface through the focusing lens group, forming some tiny and high energy spots. Focus the spot on the near place to be processed, it will melt or gasify the processed materials with high temperature.
Features:
The laser cutting and punching machine is high-tech automatic equipment combined the laser technology with the numerical control technique, featured with the high efficiency, low cost, secure and stable performances. It can cut or punch the metal or non-metal plates and pipes, especially suitable for the punching and cutting of stainless plate, iron panel, silicon chip, ceramic plate and diamond, etc. Compared to the processing method on traditional plates, the laser cutting has more superior cutting quality, higher cutting speed, and more flexibility (can be cut to any shape), can be applied to wide range of materials.
Features of Laser Cutting:
Ø The cutting slot of laser is narrow, with tiny partial deformation, the work-piece has no mechanical deformation, and without
Tool abrasion.
Ø The laser cutting is a high energy, and density controlled non-contact processing method. The laser beam focuses to a
Small spot, enabling the narrow and no-blur cutting slot.
Ø The punching precise is high, and the sheet can achieve the 0.1 milli-pore, adopt the servo system to achieve the more
Precise cutting precision.
Ø Adopted the solid laser, the maintenance and usage cost will be low.
