1. Why choose our STLS2000LY? Fanless Design.
It's common practice for current usual single polarization device, but it will make the surface of liquid crystal covered by dust soon, so that the 3D effect and brightness will slowly decreased, therefore it's imperative to remove the fan for this kinds of 3D polarization modulator.
2. Why choose our STLS2000LY? Pre-Metal technology for LCD which resist high temprature of 40, 000 lumen (LM).
The LCD of Our optical liquid crystal lens have used the technology of Metal film plating processing in advance which can greatly improve the heat resistance of products. That will avoid the occurrence of accelerated aging of LCD glass, ghosting increase, LCD liquefaction, and even burned.
3. Used for digital cinema with circular polarized 3d glasses, no need to buy 2 projecotors, Only 1 projecotor is ok. It save the high cost of 1 projector. If you wanna to use polarized 3d glasses, our 3d converter is your best choice.
4. Our 3d modulator is on sale, which is suitable for cinema TMS system. It can work when get 3d sync singal, and stop work without 3d sync signal automatially. This technolog is quite convenient for cinema using to save labor cost!
Technique parameter:
A. Use cheap polarized 3d glasses
B. Active to passive 3d, only need 1 projector.
C. Competitive price.
D. Easy to install.
This polarized 3d system is in hotsell now, and Agent is welcome!
Polarization System features
Easy set up with any DCI-compliant DLP projector.
Easy installation within 10 minutes.
High optical efficiency of 19%
Prompt response LC Filter(less than 3ms).
Eliminate the ghost utmost.
Work with projector lamps up to 6KW.
Projection with screen base up to 10m(60ft) and a 2.4 silver screen gain.
It's common practice for current usual single polarization device, but it will make the surface of liquid crystal covered by dust soon, so that the 3D effect and brightness will slowly decreased, therefore it's imperative to remove the fan for this kinds of 3D polarization modulator.
2. Why choose our STLS2000LY? Pre-Metal technology for LCD which resist high temprature of 40, 000 lumen (LM).
The LCD of Our optical liquid crystal lens have used the technology of Metal film plating processing in advance which can greatly improve the heat resistance of products. That will avoid the occurrence of accelerated aging of LCD glass, ghosting increase, LCD liquefaction, and even burned.
3. Used for digital cinema with circular polarized 3d glasses, no need to buy 2 projecotors, Only 1 projecotor is ok. It save the high cost of 1 projector. If you wanna to use polarized 3d glasses, our 3d converter is your best choice.
4. Our 3d modulator is on sale, which is suitable for cinema TMS system. It can work when get 3d sync singal, and stop work without 3d sync signal automatially. This technolog is quite convenient for cinema using to save labor cost!
Technique parameter:
A. Use cheap polarized 3d glasses
B. Active to passive 3d, only need 1 projector.
C. Competitive price.
D. Easy to install.
This polarized 3d system is in hotsell now, and Agent is welcome!
Polarization System features
Easy set up with any DCI-compliant DLP projector.
Easy installation within 10 minutes.
High optical efficiency of 19%
Prompt response LC Filter(less than 3ms).
Eliminate the ghost utmost.
Work with projector lamps up to 6KW.
Projection with screen base up to 10m(60ft) and a 2.4 silver screen gain.
| Model | STLS2000LY; |
| Applicable Projector | Through DCI certified DLP digital projectors; |
| Applicable Screen | Metal screen; |
| Applicable Screen Siz | Large to 20 m |
| Work | circular polarization modulation |
| Light valve transmittance | 40% ± 1%; |
| Light utilization | 17% ± 1% |
| Ghosting rate: | less than 0.5% |
| Response time | far less than 1ms; |
| Support frame rate | 400Hz or more; |
| Projector Max Power | 7KW |
| 2D-3D Conversion | TMS automatic control |
