Application:
suitable to cut plastic film, nonwoven, leather, PVC, EVA, fabric, BOPP, heat transfer film,decoration paper etc. It uses multi knives to cut strip and automatic roll up.
Characteristics:
It conveys with magnetic powder brake, draw,cut with pneumatic knife, take roll controlled by the magnetic powder clutch, which works at the same time with smooth and even surface.
Discharge shaft adopts positioning flatulence axis clamp with even force balance and without changing shape.
3. Configure pneumatic cutting knife can cut different sizes meanwhile and cutting width can be adjusted freely. It is easy to operate and cut precisely. The cutter shaft adopts plating nobelium hard axis without changing shape, with precise size and long life usage.
4.It uses rubber roller traction to make production stable and roll up evenly without running deviation. There is stepless variable speed control the cutting speed to make cutting speed even.
5.The material receiving axis adopts two inflatable shaft to reel up and down continuously to improve efficiency.And there is magnetic powder tension control device to control tightness of rolling material cut and make rolling material not be dragged and change chape.
6. There is meter device to measure material length. Electric parts positons reasonably, neatly, safely and it is easy to operate.
7. Waste collection system adopts wind machine waste type.
8.Roll system matching on edges or on line automatic correction discharge rack.
Parameter:
Fabric width:3200mm (1700mm,1.35mm, 2005mm,2400mm are optional)
Axis diameter of feeding and discharging material: 75mm(or made according to your demand to make)
Maxi cutting speed:200meter/minute
Cutting diameter:300mm (or to 800mm)
Mini cutting width: 10mm
Cutting material thickness: 0.1-8mm
Motor: 1.5KW
Voltage:380V/220V
size: about 3600 x 1300 x 1400mm
suitable to cut plastic film, nonwoven, leather, PVC, EVA, fabric, BOPP, heat transfer film,decoration paper etc. It uses multi knives to cut strip and automatic roll up.
Characteristics:
It conveys with magnetic powder brake, draw,cut with pneumatic knife, take roll controlled by the magnetic powder clutch, which works at the same time with smooth and even surface.
Discharge shaft adopts positioning flatulence axis clamp with even force balance and without changing shape.
3. Configure pneumatic cutting knife can cut different sizes meanwhile and cutting width can be adjusted freely. It is easy to operate and cut precisely. The cutter shaft adopts plating nobelium hard axis without changing shape, with precise size and long life usage.
4.It uses rubber roller traction to make production stable and roll up evenly without running deviation. There is stepless variable speed control the cutting speed to make cutting speed even.
5.The material receiving axis adopts two inflatable shaft to reel up and down continuously to improve efficiency.And there is magnetic powder tension control device to control tightness of rolling material cut and make rolling material not be dragged and change chape.
6. There is meter device to measure material length. Electric parts positons reasonably, neatly, safely and it is easy to operate.
7. Waste collection system adopts wind machine waste type.
8.Roll system matching on edges or on line automatic correction discharge rack.
Parameter:
Fabric width:3200mm (1700mm,1.35mm, 2005mm,2400mm are optional)
Axis diameter of feeding and discharging material: 75mm(or made according to your demand to make)
Maxi cutting speed:200meter/minute
Cutting diameter:300mm (or to 800mm)
Mini cutting width: 10mm
Cutting material thickness: 0.1-8mm
Motor: 1.5KW
Voltage:380V/220V
size: about 3600 x 1300 x 1400mm
