Fast Speed Machine for CDR DVDR Duplicator
Carton size: 65*50*31cm (length* width* height)
CD/DVD Glossy oil coating machine
Can print on any kinds of CDS
Make disk surface refresh
1. Brief:
This machine is designed especially for post-processing of disc print output. After you print any logo or patterns on the Printable CD/DVD, you can use this machine to coat gloss oil on the discs. It will protect disc printing perfectly.
2. Specification:
(1)Disc working width: 140mm
(2)Rated voltage: 220V
(3)Frequency: 50Hz-60Hz
(4)Power: 450W
(5)Machine size: 500*400*220mm (length*width*height)
(6)Carton size: 65*50*31cm (length*width*height)
(7)Machine working temperature:
(8)Coating speed: 2.5m/min, 15 seconds/piece disc
(9)Glossy oil consumption: 5-10ml/square,
3. Machine / Coating advantages:
(1)Waterproof completely
(2)stain resistance
(3)fade resistance
(4)convenient using
(5)energy conservation
(6)Low cost
duplicator/dvd duplicator/cd duplicator/cd dvd duplicator/cd dvd copy machine/cd dvd burner/duplicator machine/cd dvd duplicator copy mahcine/copy machine for cd dvd/duplicator for cd dvd
Guangzhou Ronc Electronic Technology Co., Ltd is a high-tech enterprise, engaged in blank CD-R
DVD-/+R,DVD-/+RW, Blu-ray disc, CD/DVD Case for 11 years.
We devoted to the development of high quality discs.
We are equally committed to ensuring that all products meet the quality expectations of our overseas buyers.
dvd duplicator machine
1.duplicator 1 drawer for 5/7/10/11pcs
2.Manufacture meticulously
3.Improve continually
Burning speed:Up to 24X
Use for: CD & DVD
4. Installation:
1st step: Take out machine and put it on the flat table. There is 8 machine angle (black color) and screws, install them into every angle (small hole) at the bottom of machine and disc tray seperately.
2ND step:
Pour glossy oil into Liquid storage tank (liquid depth can not be more than 1.5cm). And put tank under rubber roller(red color), then put Pipette into tank.
3rd STP:
Plug in (connected machine with power line and socket). Open three switch (right side is main switch, middle is UV lamp switch, left side is circulated liquid switch), then machine stars working. UV lamp needs warming, let machine tick over around 3minutes in advance. After that, you can start coating CD/DVD after oil poured over the entire rubber roller.
5. Cleaning method (you can chose any one of them):
(1) Change glossy oil into alcohol in the liquid storage tank, and let machine work a minute.
(2) Take out the pipette from tank, pour alcohol on the gap of rollers, let machine coat several pieces discs, then rubber rule will be finished cleanliness. If you like, you can use the cotton which is with alcohol to wipt roller directly.
Carton size: 65*50*31cm (length* width* height)
CD/DVD Glossy oil coating machine
Can print on any kinds of CDS
Make disk surface refresh
1. Brief:
This machine is designed especially for post-processing of disc print output. After you print any logo or patterns on the Printable CD/DVD, you can use this machine to coat gloss oil on the discs. It will protect disc printing perfectly.
2. Specification:
(1)Disc working width: 140mm
(2)Rated voltage: 220V
(3)Frequency: 50Hz-60Hz
(4)Power: 450W
(5)Machine size: 500*400*220mm (length*width*height)
(6)Carton size: 65*50*31cm (length*width*height)
(7)Machine working temperature:
(8)Coating speed: 2.5m/min, 15 seconds/piece disc
(9)Glossy oil consumption: 5-10ml/square,
3. Machine / Coating advantages:
(1)Waterproof completely
(2)stain resistance
(3)fade resistance
(4)convenient using
(5)energy conservation
(6)Low cost
duplicator/dvd duplicator/cd duplicator/cd dvd duplicator/cd dvd copy machine/cd dvd burner/duplicator machine/cd dvd duplicator copy mahcine/copy machine for cd dvd/duplicator for cd dvd
Guangzhou Ronc Electronic Technology Co., Ltd is a high-tech enterprise, engaged in blank CD-R
DVD-/+R,DVD-/+RW, Blu-ray disc, CD/DVD Case for 11 years.
We devoted to the development of high quality discs.
We are equally committed to ensuring that all products meet the quality expectations of our overseas buyers.
dvd duplicator machine
1.duplicator 1 drawer for 5/7/10/11pcs
2.Manufacture meticulously
3.Improve continually
Burning speed:Up to 24X
Use for: CD & DVD
Standalone Duplicator(1-11 trays) |
- Self diagnostics when power on |
- User friendly interface with LCD display |
- Automatic format detection |
- Easy operation without software and training |
- Firmware upgradeable via CD-ROM |
- Edit Track (CD only) - Collect different tracks (songs) on a number of CDs and put them onto a single CD |
- Auto Verify : Verify automatically if the target DVDs can be read after copying |
- Auto Compare : Compare automatically the source DVD and the target DVD after copying |
- Supports multi session CD |
- UnderRun protect |
- Burn mode : Supports DAO(Disk at once-CD only), TAO (Track at once -CD only) |
Reader / Source: DVD-ROM / Hard Drive |
Writer/ Target: 24X SATA Dual Layer DVD+/-RW Burner |
Data Transfer Rate (Write): 8cm DVD-R/RW, DVD+R/RW with Adapter 2x CLV, DVD-RW 6x, CD-RW 32x, CD-R 40x, DVD+R 24x, DVD+R DL 10x, DVD-R 24x, DVD-R DL 10x, DVD+RW 8x |
Disc Format (Write): DVD DVD-R (Ver 2.1 for General), DVD-R DL (Ver 3.0), DVD-RW (Ver 1,0-1.2), DVD+R (Ver 1.0-1.3), +R, DL (1.1), +RW (1.1,1.2) +RW HS, DVD-RAM, CD CD-R (Type 74, 650MB / Type 80, 700MB), CDRW |
Disc Format (Read): DVD DVD-ROM (Single and Dual Layer), DVD-RAM, (Ver 2.0-2.2 non-cartridge version), DVD-R, DVD-R, DL (Dual Layer), DVD-RW, +R, +R DL, +RW, CD CD-ROM(Mode 1), CD-ROM XA Mode 2), CDText, CD-DA, CD-Extra, Video CD, PhotoCD, CDR, CD-RW (HS, US, US+) SMART USB 2.0 connection: When connected to a computer using this external connection, the built-in hard |
4. Installation:
1st step: Take out machine and put it on the flat table. There is 8 machine angle (black color) and screws, install them into every angle (small hole) at the bottom of machine and disc tray seperately.
2ND step:
Pour glossy oil into Liquid storage tank (liquid depth can not be more than 1.5cm). And put tank under rubber roller(red color), then put Pipette into tank.
3rd STP:
Plug in (connected machine with power line and socket). Open three switch (right side is main switch, middle is UV lamp switch, left side is circulated liquid switch), then machine stars working. UV lamp needs warming, let machine tick over around 3minutes in advance. After that, you can start coating CD/DVD after oil poured over the entire rubber roller.
5. Cleaning method (you can chose any one of them):
(1) Change glossy oil into alcohol in the liquid storage tank, and let machine work a minute.
(2) Take out the pipette from tank, pour alcohol on the gap of rollers, let machine coat several pieces discs, then rubber rule will be finished cleanliness. If you like, you can use the cotton which is with alcohol to wipt roller directly.
