Description:
LD-1008P Switch provides power and data transmission using Cat5e cable from a single point. 8 +1 port Fast Ethernet ports can be used to connect 10/100Mps, also Port 1 to Port 8 can provide industry standard IEEE802.3af power. The product meets the needs both common and ordinary Ethernet port POE power supply. Advanced auto-sensing algorithm gives power only to IEEE802.3af end devices, so no need to worry about damaging proprietary POE or non-POE equipment. In addition, it discontinues the power when POE devices are disconnected. Simple and reliable design, the POE Switch RB-P1050004 automatically determines POE requirements, speed, duplex, and cable type using AutoUplink™ .
LD-1008P The affordably priced POE Switch RB-P1050004 delivers POE to any small business network that wants to simplify the installation of wireless access points and IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. POE eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access and lowers installation costs. Compact and flexible, Compact and flexible, LD-1008P is ideal for small business networks that need to inexpensively use POE to deploy wireless access points and IP-based network surveillance cameras.
Key Features:
Supply power to wireless access points and surveillance cameras over Cat-5 cabling
Port 1~ Port 8 Supports POE IEEE 802.3af compliant PDs
9 x 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet RJ45 Ports
Compliance with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX standards
Flow Control: Full-Duplex using IEEE 802.3x, Half-duplex using Back pressure
Support port auto-flip(Auto MDI/MDIX)
Support uplink port lightning (Port 9 up to 2 level light protecting)
Max POE output: Up to 120W(Port 1 Port 8)
Max for each port: 15.4W
Using store and forward switching mechanism
All ports support wire-speed switching, between rang 64 to 1536 all can achieve wire-speed
Without-Fan, natural cooling
Small; Compact and quiet design suitable for placement on a desktop or wall
Zero-configuration features Power is automatically supplied to the adaptive equipment
Convenient application
Select Insert 8 based on the IEEE802. Af international standard POE IP devices, like a wireless access point AP or IP based on network of surveillance cameras, and 1 common network interface, data communication function in common. POE terminal equipment placed the IEEE802.3af international standard to place -- wall height or the ceiling for maximum coverage - or other you need to put them in place of. Through the standard cat5e transfer power and data, very convenient, particularly affected by installation engineer who is working on the security camera.
Plug and Play
Standards-based LD-1008P easily integrate your existing 10/ 100 Ethernet, and self -aware and self- adjust the speed and the type of cable networks.
Silent and Compact
Compact and convenient design, durable metal housing, which can use the built-in accessory box easily be placed on a desktop or wall. Dissolved quiet fan design your small office environment
Valuable
The Ethernet -based data exchange and integration into the inside of a unit, which LD-1008P saves space, reduces cables and eliminates the need to connect an electrical outlet - minimize installation costs, simplifying installation of POE equipment' performance, and eliminate the need for a full-time electrician or extension cord trouble.
Green Environmental Protection
Compared with 60% of non-green version of the energy-saving automatic standby mode, and cable length detection function - when that port is not connected, the automatic standby mode to save energy; Cable shorter than 10 meters, the lower transmission power. At least 80 % of the packaging recyclable resources
LD-1008P Switch provides power and data transmission using Cat5e cable from a single point. 8 +1 port Fast Ethernet ports can be used to connect 10/100Mps, also Port 1 to Port 8 can provide industry standard IEEE802.3af power. The product meets the needs both common and ordinary Ethernet port POE power supply. Advanced auto-sensing algorithm gives power only to IEEE802.3af end devices, so no need to worry about damaging proprietary POE or non-POE equipment. In addition, it discontinues the power when POE devices are disconnected. Simple and reliable design, the POE Switch RB-P1050004 automatically determines POE requirements, speed, duplex, and cable type using AutoUplink™ .
LD-1008P The affordably priced POE Switch RB-P1050004 delivers POE to any small business network that wants to simplify the installation of wireless access points and IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. POE eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access and lowers installation costs. Compact and flexible, Compact and flexible, LD-1008P is ideal for small business networks that need to inexpensively use POE to deploy wireless access points and IP-based network surveillance cameras.
Key Features:
Supply power to wireless access points and surveillance cameras over Cat-5 cabling
Port 1~ Port 8 Supports POE IEEE 802.3af compliant PDs
9 x 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet RJ45 Ports
Compliance with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX standards
Flow Control: Full-Duplex using IEEE 802.3x, Half-duplex using Back pressure
Support port auto-flip(Auto MDI/MDIX)
Support uplink port lightning (Port 9 up to 2 level light protecting)
Max POE output: Up to 120W(Port 1 Port 8)
Max for each port: 15.4W
Using store and forward switching mechanism
All ports support wire-speed switching, between rang 64 to 1536 all can achieve wire-speed
Without-Fan, natural cooling
Small; Compact and quiet design suitable for placement on a desktop or wall
Zero-configuration features Power is automatically supplied to the adaptive equipment
Convenient application
Select Insert 8 based on the IEEE802. Af international standard POE IP devices, like a wireless access point AP or IP based on network of surveillance cameras, and 1 common network interface, data communication function in common. POE terminal equipment placed the IEEE802.3af international standard to place -- wall height or the ceiling for maximum coverage - or other you need to put them in place of. Through the standard cat5e transfer power and data, very convenient, particularly affected by installation engineer who is working on the security camera.
Plug and Play
Standards-based LD-1008P easily integrate your existing 10/ 100 Ethernet, and self -aware and self- adjust the speed and the type of cable networks.
Silent and Compact
Compact and convenient design, durable metal housing, which can use the built-in accessory box easily be placed on a desktop or wall. Dissolved quiet fan design your small office environment
Valuable
The Ethernet -based data exchange and integration into the inside of a unit, which LD-1008P saves space, reduces cables and eliminates the need to connect an electrical outlet - minimize installation costs, simplifying installation of POE equipment' performance, and eliminate the need for a full-time electrician or extension cord trouble.
Green Environmental Protection
Compared with 60% of non-green version of the energy-saving automatic standby mode, and cable length detection function - when that port is not connected, the automatic standby mode to save energy; Cable shorter than 10 meters, the lower transmission power. At least 80 % of the packaging recyclable resources
| Product name | 8+1 port Network POE Switches |
| Model NO | LD-1008P |
| LD-1008P connection | 9 10/100M RJ45 copper ports ( all ports support MDI / MDIX auto-sensing) |
| Forwarding mode | Store and Forward |
| Network Media | 10BASE-T: 3,4,5 unshielded twisted pair (≤ 100m) 100BASE-TX: 5 unshielded twisted pair and above (≤ 100m) |
| Performance Specifications |
Switch Capacity: 1.6Gbps ( non-blocking ) Network latency (100 to 100M bps): maximum delay of less than 20 microseconds Packet Buffer Memory : 96KB Address database size : 1,000 Mean time between failures (MTBF): 190,000 hours ( about 21 years ) |
| Network protocols and standards-compliant |
IEEE 802.3i 10BASET IEEE 802.3u 100BASETX IEEE 802.3x Flow Control IEEE 802.1af DTE Power via MDI IEEE 802.3af |
| LEDs Indicator |
System: Power Each port: Connection , POE operation |
| Power Support |
Maximum powercapacity : 140 W PoE Maximum powercapacity : 120 W ( port 1 to port 8 ) 48VDC, 2.5 power output ; ( each country has its customized power plug ) |
| Physical Specifications |
Size:189 x 102 x28 mm Weight:0.65kg |
| Environmental Specifications |
Operating temperature: 0°~ 55°C Storage temperature:-20°~ 75°C Working Humidity:10%~90%,Non-condensing Storage humidity:10%~95%,Non-condensing Working height:Elevation 3000m(10,000ft) Storage height:Elevation 3000m(10,000ft) |
| Radiation |
CE mark, commercial FCC Part 15 Class B VCCI Class B EN 55022 (CISPR 22), Class B |
| Security |
CE Mark ,commercial CE/LVD EN60950 |
| Warranty | 1year |
| Package |
LD-1008P POE Switch LD-1008P Installating Instructions Warranty / User Information Card |
