hobby mini laser cutting machine for exquisite objects GY-4030M
Description:
1.Adopt originated imported motors and drivers, high performance, fast response, good stability.
2.Precision-linear rail guide,ensure the machine run accuracy.
3.High-perfomance laser tube and laser power supply,stability,durability.
4.the open style design,provide abundant inferface and input/output signals,all kinds of peripherals is state signal dynamic control and offer all users spot tailored service.
5.the realization of rapid continuous cutting function is due to high-end DSP technology strong data processing capacity,the cooperation of designed computer software and exactly precision mechanical system,ensure the effect and working efficiency under high speed runing.
the main parts of the machine
1.64 bit DSP offline control system.
2.America imported motor and drive.
3.Japan imported high precision 6 balance guide rail.
4.ShangHai 40W laser tube.
5.stabilizing voltage constant current laser power supply.
6.Singapore imported focus lenses
7.3000 C industrial water chiller.
8.exhausted fan and air compressor.
aceessories reference photoes
warrenty
one year for the whole machine.
consumable parts
1.focus lenses--- three months
2.laser tubes---- six months
Applicable materials:
cloth,fabric,textile,garment,apparel,leather,bamboo,paper,cardboard,paperboard,Balsa wood,wood,plank,acrylic,rubber,plywood,MDF,PVC,rubber,Plexiglass,Organic Glass
Samples Display:
Technical Index:
Working area
400*300mm
Engraving Speed
0.1-64000(mm/min)
Cutting Speed
0.1-36000(mm/min)
Cutting thickness
0.1-15mm(Determinedby materials)
Laser power
40w
Resolution
4000dpi
Location precision
<0.05mm
The smallest characters formed
Chinese:2×2mm,letter:1×1mm
Power Supply
AC220V±10%,50Hz
Gross Power
≤1000W
Working temperature
0°C~45°C
Working humidity
5-95% (Free of condensed water)
Cooling way
Industry Water cooling
Graphic file format Supported
PLT,CDR,AI,DWG,DXF,DST,BMP,JPEG,TIFF,GIF,PCX,TGA etc.
Service and support:
24hs phone support
Fax service
Internet remove assistance is available 24hs everyday
24hs E-mail support
Installation and training:
1.Without sending engineer
Manual and video will be sent to you for training and learning how to install machine.
Internet remove assistance is available 24hs everyday.
2.With engineer
Engineer will be sent to your country for one week, dealing with the installation and training.
User need to take care of tickets, accommodation, food and cooperating with the engineer we dispatch.
3. If you are here
you got 5 days for free training, if you are in our factory. We will learn you any basic information about the machine.
| Working area | 400*300mm |
| Engraving Speed | 0.1-64000(mm/min) |
| Cutting Speed | 0.1-36000(mm/min) |
| Cutting thickness | 0.1-15mm(Determinedby materials) |
| Laser power | 40w |
| Resolution | 4000dpi |
| Location precision | <0.05mm |
| The smallest characters formed | Chinese:2 × 2mm,letter:1 × 1mm |
| Power Supply | AC220V ± 10%,50Hz |
| Gross Power | ≤1000W |
| Working temperature | 0 ° C~45 ° C |
| Working humidity | 5-95% (Free of condensed water) |
| Cooling way | Industry Water cooling |
| Graphic file format Supported | PLT,CDR,AI,DWG,DXF,DST,BMP,JPEG,TIFF,GIF,PCX,TGA etc. |
