The CNC Pipe Bending Machine is servo motor driven; high bend accuracy; bending pipes no wrinkles or cracks; low noise, easy operation; German technology, Favorable price. It can also bend square tubes or pipes, flat bar, U or channel steel, H steel, round bar, angle bar steel, etc.
1, the machine raw material is reinforced to be firm and strong. Annealed to eliminate internal stress, prevent from anti-permanent deformation.
2, Servo motor can realize push bending large radius. High bend accuracy, no wrinkles, no cracks.
3, The drive shaft is installed from the upper, precise installation and easy maintenance. Bend shaft and drive chains are casted integratedly. Drive spindle driven by double cylinder, 5 rpm bend speed, high bend accuracy. Return bend speed 8 rpm; rapid reset; throttle buffer design makes high reset accuracy
4, The feeding system can feed the pipe several times according to the pipe bend numbers. (AC servo motor closed-loop control is adapted).
5, Three dimensional bend pipes, feeding system, bend system, rotary system are all servo motor controlled (AC servo motor closed-loop control).
6, Touch-screen display; input bend data on PC and automatically bend pipes. Touch screen + PLC + servo motor control, reliable.
7, The programmable controller can preset 16 kinds of 3-D bend. Bending repeat accuracy: ± 0.1 °.
8, Foot switch power on and off, easy operate and safe. It can fulfill the whole bend process: feeding, clamping, bending, rotating, and downloading.
9, Simulation software inserted to check the bend situation or possible bend errors.
10, Automatic lubrication system.
11, Water or wind cooling device can keep the hydro oil in suitable temperature. High speed and stable hydro oil output.
12, Oil pump, stable working function, low vibration, low noise.
13, automatic and efficient multi-radii pipe bending; Bend pipes for aerospace, vehicles, motorcycles, refrigeration, shipbuilding etc.
14, Efficient and reliable CNC pipe bender, fast deliver in time, considerate after-sale service. One year warranty.
15, Special accessories of the machine can be provided according to customer's requirements, eg. Anti-wrinkle device,etc.
| Specification/Model | WFCNC114x8 | ||
| Max. bending capacity(mm) | Φ114x8 | ||
| Min. bending capacity(mm) | Φ30 | ||
| Max. bending radius(mm) | 580 | ||
| Min. bending radius(mm) | 50 | ||
| Max. bending angle | 190 | ||
| Length of mandrel(mm) | 5500 | ||
| Mandrel stroke(mm) | 1000 | ||
| Mandrel adjustment(mm) | 100 | ||
| Clamp die stroke(mm) | 320 | ||
| Clamp die return stroke(mm) | 320 | ||
| Follower die stroke(mm) | 1000 | ||
| Pipe end Min. length(mm) | 500 | ||
| Tools centerline height(mm) | 95 | ||
| Working height(mm) | 1200 | ||
| Speed range | Bending speed C(r/min) | 0-3 | |
| Feeding trolley walking speed Y(r/min) | 0-16 | ||
| Clamping set speed B(r/min) | 0-6 | ||
| Pre-set speed(each axis-CNC) | 9 | ||
| Working accuracy | Bending accuracy C axis(°) | ±0.1 | |
| Feeding accuracy Y axis(°) | ±0.15 | ||
| Rotary accuracy B axis(°) | ±0.1 | ||
| Capacity of memory | 10^5 | ||
| C-axis stall torque(N.m) | 89000 | ||
| Motor power (KM) | 45 | ||
| Hydraulic system pressure(Mpa) | 14 | ||
| Hydraulic tank capacity(L) | 550 | ||
| Dimensions: L*W*H(m) | 9.9*3.52*2.3 | ||
