Polarization Modulator for 3D Digital Cinema
3D Cinema Polarization modulator
High Quality 3D Passive Cinema System
China Passive Polarized 3D Modulator for cinema
3D Polarized System for cinema
Why Choose Our Passive Modulator for Cinema( STLS2000LY)?
1. Why choose our STLS2000LY? Fanless Design.
It's common practice for current usual single polarization device, but it will make the surface of liquid crystal covered by dust soon, so that the 3D effect and brightness will slowly decreased, therefore it's imperative to remove the fan for this kinds of 3d polarization modulator.
2. Why choose our STLS2000LY? Pre-Metal technology for LCD which resist high temprature of 40, 000 lumen (LM).
The LCD of Our optical liquid crystal lens have used the technology of Metal film plating processing in advance which can greatly improve the heat resistance of products. That will avoid the occurrence of accelerated aging of LCD glass, ghosting increase, LCD liquefaction, and even burned.
Technique parameter:
Our Single Polarization System is a usual cinema 3D projection technology. It uses passive luminous efficacy, mainly by High-speed refresh of liquid crystal to show the left and right image alternately. Polarization light liquid crystal will change the circular polarization light angle of the right and left eye's image. After wear the circular polarized glasses, both eyes could see difference image. So, we can see different respective image for right and left eyes that to cheat our brains to achieve 3D view. Then we can see the beautiful vivid 3D movies.
Polarization System features
Easy set up with any DCI-compliant DLP projector.
Easy installation within 10 minutes.
High optical efficiency of 19%
Prompt response LC Filter(less than 3ms).
Eliminate the ghost utmost.
Work with projector lamps up to 6KW.
Projection with screen base up to 10m(60ft) and a 2.4 silver screen gain.
3-4. Requirements
In order to ensure that the system can work well, there are some requirements for equipment, as follows:
-------Digital cinema projector
The projector must be standard 2k digital projector and can be compatible with the following models:
Barco: DP1200, DP1500, DP2000, DP90, DP100, DP2k-20C, DP2k-32B etc.
NEC: NC800, NC1600, NC2400, NC2000C, NC3200S etc.
Christie: CP2210, CP2220, CP2230, CP2000 etc.
-------Digital cinema servers
Servers must be DCI approved and 3D functional; The related brand as below: Dolby, Doremi, GDC, Kodak, etc.
-------Silver screen
The screen must be silver screen with gain 2.4
------3D Glasses
Circular polarized glasses required
3D Cinema Polarization modulator
High Quality 3D Passive Cinema System
China Passive Polarized 3D Modulator for cinema
3D Polarized System for cinema
Why Choose Our Passive Modulator for Cinema( STLS2000LY)?
1. Why choose our STLS2000LY? Fanless Design.
It's common practice for current usual single polarization device, but it will make the surface of liquid crystal covered by dust soon, so that the 3D effect and brightness will slowly decreased, therefore it's imperative to remove the fan for this kinds of 3d polarization modulator.
2. Why choose our STLS2000LY? Pre-Metal technology for LCD which resist high temprature of 40, 000 lumen (LM).
The LCD of Our optical liquid crystal lens have used the technology of Metal film plating processing in advance which can greatly improve the heat resistance of products. That will avoid the occurrence of accelerated aging of LCD glass, ghosting increase, LCD liquefaction, and even burned.
Technique parameter:
Our Single Polarization System is a usual cinema 3D projection technology. It uses passive luminous efficacy, mainly by High-speed refresh of liquid crystal to show the left and right image alternately. Polarization light liquid crystal will change the circular polarization light angle of the right and left eye's image. After wear the circular polarized glasses, both eyes could see difference image. So, we can see different respective image for right and left eyes that to cheat our brains to achieve 3D view. Then we can see the beautiful vivid 3D movies.
Polarization System features
Easy set up with any DCI-compliant DLP projector.
Easy installation within 10 minutes.
High optical efficiency of 19%
Prompt response LC Filter(less than 3ms).
Eliminate the ghost utmost.
Work with projector lamps up to 6KW.
Projection with screen base up to 10m(60ft) and a 2.4 silver screen gain.
3-4. Requirements
In order to ensure that the system can work well, there are some requirements for equipment, as follows:
-------Digital cinema projector
The projector must be standard 2k digital projector and can be compatible with the following models:
Barco: DP1200, DP1500, DP2000, DP90, DP100, DP2k-20C, DP2k-32B etc.
NEC: NC800, NC1600, NC2400, NC2000C, NC3200S etc.
Christie: CP2210, CP2220, CP2230, CP2000 etc.
-------Digital cinema servers
Servers must be DCI approved and 3D functional; The related brand as below: Dolby, Doremi, GDC, Kodak, etc.
-------Silver screen
The screen must be silver screen with gain 2.4
------3D Glasses
Circular polarized glasses required
| Model | STLS2000LY; |
| Applicable Projector | Through DCI certified DLP digital projectors; |
| Applicable Screen | Metal screen; |
| Applicable Screen Size | Large to 20 m |
| Work | circular polarization modulation |
| Light valve transmittance | 40% ± 1%; |
| Light utilization | 17% ± 1% |
| Ghosting rate: | less than 1% |
| Response time | far less than 1ms; |
| Support frame rate | 400Hz or more; |
| Projector Max Power | 7KW |
| 2D-3D Conversion | TMS automatic control |
