JND-LP-18 Bottle unscrambling machine is developed and manufactured on the basis of imported technology, meeting with the high-speed demanding of civil market.
Main Features
1. The decelerator for the main engine adopts the torsion-restriction structure, which can prevent damage when broke down.
2. It organize the bottle by twice raising, which assure every station has the bottle, improving the efficiency.
3. It adopts wind transmission by suspending bottle mouth, which can avoid the bottle turnover
4. It has the damaged-bottle kicking-off system.
5. It has bottle-blocking inspection, which can give an alarm and stop when there is bottle blocked.
6. It has the no-bottle sensor, which can send out the working signal to the elevator to supply the bottle automatically.
7. There is photoelectricity switch in wind transportation channel, which can control the on-off of the machine.
8. It has oil injection mouse, which can fill in the lubricating oil to the wheel gear/axel bearing/cam.
9. It has the maintenance door and mold changing door.
10. Main electrical opponents like frequency converter/PLC/photoelectricity switch/electric relay use the brand of MITSUBISHI, OMRON, Siemens etc.
Technology Parameter
1. Station no.: 18
2. Speed: 14000-15000B/H
3. Maximum Speed: 15000B/H
4. Air pressure: 0.7MPa
5. Air consumption: 1.5 M3/ min
6. Suitable bottle: Diameter 50-90, Height 165-290
7. Main engine power: 1.5KW
8. Elevator power: 0.75KW
9. Dimension: Φ 2640× 2300(Diameter X height)
10. Total Weight: 2000Kg
Main Features
1. The decelerator for the main engine adopts the torsion-restriction structure, which can prevent damage when broke down.
2. It organize the bottle by twice raising, which assure every station has the bottle, improving the efficiency.
3. It adopts wind transmission by suspending bottle mouth, which can avoid the bottle turnover
4. It has the damaged-bottle kicking-off system.
5. It has bottle-blocking inspection, which can give an alarm and stop when there is bottle blocked.
6. It has the no-bottle sensor, which can send out the working signal to the elevator to supply the bottle automatically.
7. There is photoelectricity switch in wind transportation channel, which can control the on-off of the machine.
8. It has oil injection mouse, which can fill in the lubricating oil to the wheel gear/axel bearing/cam.
9. It has the maintenance door and mold changing door.
10. Main electrical opponents like frequency converter/PLC/photoelectricity switch/electric relay use the brand of MITSUBISHI, OMRON, Siemens etc.
Technology Parameter
1. Station no.: 18
2. Speed: 14000-15000B/H
3. Maximum Speed: 15000B/H
4. Air pressure: 0.7MPa
5. Air consumption: 1.5 M3/ min
6. Suitable bottle: Diameter 50-90, Height 165-290
7. Main engine power: 1.5KW
8. Elevator power: 0.75KW
9. Dimension: Φ 2640× 2300(Diameter X height)
10. Total Weight: 2000Kg
