1. Introduction:
This series is designed for liquids (sterile injection) filling, stoppering and capping in biological products and blood products, especially suitable for Freezing &Drying Technology. This machine has the most advanced control system, and also has the advantages of delicate designing, accurate filling and stable performance. It's the ideal machine for the production of refrigerants, liquids and blood products. Suitable for the auto production lines and totally in compliance with GMP requirements.
2. Characteristics:
a. Adopting piston-type metering pump to fill, with high filling precision; the filling scope is large and suitable for various liquids of viscosity.
b. In special conditions, filling with ceramic piston pump.
c. Filling system is metering pump, easy to clean & disinfect, with stable performance.
d. Frequency conversion, and automatically display counting conditions,
e. Filling system has the function of shrinking, no leakage.
f. Automatically finish bottle-capping, measuring and filling, and stoppering process.
g. Can be equipped with hundred-grade protective device according to customers' needs.
h. Totally in compliance with GMP requirements.
3. Technical parameters:
Filling dosage: 20-500ml
Filling error: ≤±1%
Auto stoppering precision:≥99%
Voltage: 380V 50HZ
Power: 1.2kw
Needed vacuum degree: 6.6×10-2Mpa
Needed vacuum consumption: 14M³/Hr
Single noise: ≤70dB
G.W.: 300kg
Dimension: 3000*800*2100mm(with laminar hood), 3000*800*1500mm( without laminar hood)
Production capacity(based on 4-nozzle filling )
20-100ml: 3000-3600BPM
100-250ml: 2500-3000BPM
250-500ml: 1500-2500BPM
Note: We customize the system, like, with 6-nozzle, 8-nozzle unit to increase daily capacity.
This series is designed for liquids (sterile injection) filling, stoppering and capping in biological products and blood products, especially suitable for Freezing &Drying Technology. This machine has the most advanced control system, and also has the advantages of delicate designing, accurate filling and stable performance. It's the ideal machine for the production of refrigerants, liquids and blood products. Suitable for the auto production lines and totally in compliance with GMP requirements.
2. Characteristics:
a. Adopting piston-type metering pump to fill, with high filling precision; the filling scope is large and suitable for various liquids of viscosity.
b. In special conditions, filling with ceramic piston pump.
c. Filling system is metering pump, easy to clean & disinfect, with stable performance.
d. Frequency conversion, and automatically display counting conditions,
e. Filling system has the function of shrinking, no leakage.
f. Automatically finish bottle-capping, measuring and filling, and stoppering process.
g. Can be equipped with hundred-grade protective device according to customers' needs.
h. Totally in compliance with GMP requirements.
3. Technical parameters:
Filling dosage: 20-500ml
Filling error: ≤±1%
Auto stoppering precision:≥99%
Voltage: 380V 50HZ
Power: 1.2kw
Needed vacuum degree: 6.6×10-2Mpa
Needed vacuum consumption: 14M³/Hr
Single noise: ≤70dB
G.W.: 300kg
Dimension: 3000*800*2100mm(with laminar hood), 3000*800*1500mm( without laminar hood)
Production capacity(based on 4-nozzle filling )
20-100ml: 3000-3600BPM
100-250ml: 2500-3000BPM
250-500ml: 1500-2500BPM
Note: We customize the system, like, with 6-nozzle, 8-nozzle unit to increase daily capacity.
