POE adapter enables both home and office users to easily connect and supply power to Power over Ethernet (PoE) devices such as wireless Access Points (APs), IP cameras, and IP phones while adding more Ethernet devices like computers, printers, and Network Attached Storage (NAS) onto a network. Built with home and small business users in mind, this compact PoE injector make it ideal for use in virtually any room or office...
1. Input Voltage range: 100(-10%)VAC to 240(+10%)VAC
2. Frequency range: 47~63Hz
3. Output voltage: 12~56V (such as 12V, 18V, 24V, 36V, 48V)
4. Output power: Plug in type, 12~24W(12W, 18W, 24W);
Desktop type, 12~60W(12W, 18W, 24W, 36W, 48W, 60W)
5. Ripple & Noise: 200mV
6. Efficiency: >80%
7. Plug and Play installation
8. Simplified the installation of Ethernet based devices.
9. Compliant with IEEE802.3af/at.
Efficiency:
End to end: ≈ 85% (at 24W load at 51V input, 12V model)
Ports RJ45 shielded connector for Data Out
Centre positive barrel: 5.5mm x 2.5mm for DC Out
Applications
- IP Telephones
- Wireless Network Access Points
- Blue Tooth Access Points
- Security Cameras
- IP Printing Servers
1. Input Voltage range: 100(-10%)VAC to 240(+10%)VAC
2. Frequency range: 47~63Hz
3. Output voltage: 12~56V (such as 12V, 18V, 24V, 36V, 48V)
4. Output power: Plug in type, 12~24W(12W, 18W, 24W);
Desktop type, 12~60W(12W, 18W, 24W, 36W, 48W, 60W)
5. Ripple & Noise: 200mV
6. Efficiency: >80%
7. Plug and Play installation
8. Simplified the installation of Ethernet based devices.
9. Compliant with IEEE802.3af/at.
Efficiency:
End to end: ≈ 85% (at 24W load at 51V input, 12V model)
Ports RJ45 shielded connector for Data Out
Centre positive barrel: 5.5mm x 2.5mm for DC Out
Applications
- IP Telephones
- Wireless Network Access Points
- Blue Tooth Access Points
- Security Cameras
- IP Printing Servers
| AC InputVoltage Range | EMC |
| 90 to 264VAC | FCC Part 15 Class B |
| AC Input Voltage Rating | EN55022 Class B |
| 100 to 240VAC | Isolation Test |
| AC Input Current | Primary to Secondary: 3000VAC for 1 minute 10mA |
| 0.5A(RMS) max. for 90VAC | Primary to F. G.: 1500VAC for 1 minute |
| 0.35A(RMS) max. for 240VAC | Output to F. G.: 1500VAC |
| Leakage Current | Immunity EN50082-1 |
| 0.25mA max. @ 254VAC 60Hz | ESD: EN61000-4-2. Level 3 |
| AC Input Frequency | RS: EN61000-4-3. Level 2 |
| 47-63Hz | EFT: EN61000-4-4. Level 2 |
| AC Inrush Current | Surge: EN61000-4-5. Level 3 |
| 15A(RMS) max. for 115VAC | CS: EN61000-4-6. Level 2 |
| 20A(RMS) max. for 230VAC | Voltage Dips EN61000-4-11 |
| OUTPUT: | Harmonic: EN61000-3-2 |
| Total Output Power | Insulation Resistance |
| 12W | Primary to secondary: > 10M OHM 500VDC |
| Efficiency | Primary to FC: > 10M OHM 500VDC |
| 80% (typical) at Max. load, and 120VAC 60Hz | FEATURE: |
| Hold-up Time | Over Voltage/Current, Short Circuit Protection |
| 16mS min. 120VAC and max. load | The output can be shorted permanently without damage |
| Transient O/P Voltage Protection | Indicators |
| 60V max. at switch on and off at any AC line Phase | Led #1 indicator for input power “ on” GREEN |
| ENVIRONMENTAL: | Input Connector |
| Temperature | IEC320 inlet 3 pin |
| Operation 0 to +40° C | Data Connector |
| Non-operation -25 to +65° C | RJ45 +24V pins4& 5, Power Return pins7& 8 |
| Humidity | |
| Operation 5 to 90% |
