TS1600F are 16-port 10/100Mbps PoE switch with 16 port PoE. The PoE ports can automatically detect and supply power to IEEE802.3af/at compliant Powered Devices (PD). The electrical power and data transmission on the same cable can expand your network to the places where no power lines or outlets, where you can install devices such as APs, IP cameras, or IP phones etc.
TS1600F provide a simple, cost-effective, and non-blocking wire-speed performance with 19-inch metal shape for rack deployment in office or department network application.
Features
Interface information
16 10/100Mbps RJ45 Ports
16 Ports PSE
PoE(Power over Ethernet)
Complies with IEEE802.3af/at Power over Ethernet
Supports PoE Power up to 32W for each PoE port
Auto detect power device
Remote power and Data feeding up to 100m
Switch
Flow Control for Full Duplex operation and back pressure for Half Duplex Operation
8K MAC address, automatic address learning and address aging
Support Energy-Efficient Ethernet (EEE) function (IEEE802.3az)
Built-in power supply can be chosen by the customer
PoE Features
The TS1600F can provide up to 32 Watts of power to attached devices, such as VoIP phones, wireless access points; surveillance cameras etc, all over existing cat. 5cables. The switch eliminates the need for individual power sources for devices in the network, saving on costs for power cables and avoiding power outlet availability issues.
Overload Arrangement
TS1600F have the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 160/240/300W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port(The larger port number, the lower priority).
Application
Providing 16-Port PoE in-line power interfaces, the TS1600F can easily build a power centrally-controlled IP phone system, IP Camera system and Wireless AP group for the enterprise. Cameras can be installed around the corner in the company or campus for surveillance demands. Without the powersocket limitation, the TS1600F make the installation of cameras more easily and efficiently
Specification
Hardware
Adapter information
Ordering information
TS1600F provide a simple, cost-effective, and non-blocking wire-speed performance with 19-inch metal shape for rack deployment in office or department network application.
Features
Interface information
16 10/100Mbps RJ45 Ports
16 Ports PSE
PoE(Power over Ethernet)
Complies with IEEE802.3af/at Power over Ethernet
Supports PoE Power up to 32W for each PoE port
Auto detect power device
Remote power and Data feeding up to 100m
Switch
Flow Control for Full Duplex operation and back pressure for Half Duplex Operation
8K MAC address, automatic address learning and address aging
Support Energy-Efficient Ethernet (EEE) function (IEEE802.3az)
Built-in power supply can be chosen by the customer
PoE Features
The TS1600F can provide up to 32 Watts of power to attached devices, such as VoIP phones, wireless access points; surveillance cameras etc, all over existing cat. 5cables. The switch eliminates the need for individual power sources for devices in the network, saving on costs for power cables and avoiding power outlet availability issues.
Overload Arrangement
TS1600F have the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 160/240/300W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port(The larger port number, the lower priority).
Application
Providing 16-Port PoE in-line power interfaces, the TS1600F can easily build a power centrally-controlled IP phone system, IP Camera system and Wireless AP group for the enterprise. Cameras can be installed around the corner in the company or campus for surveillance demands. Without the powersocket limitation, the TS1600F make the installation of cameras more easily and efficiently
Specification
Hardware
| Standard | IEEE802.3, IEEE802.3u, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at |
| Network Media(Cable) | 10BASE-T: UTP category 3,4,5 cable (≤100m) 100BASE-TX: UTP category 5,5e cable (≤100m) |
| LED | System: Power (Green) Per port: PoE (Orange) LINK/ACT(Green) |
| MAC Address Table | 8K, Auto-learning, Auto-aging |
| Transfer mode | Store-and-Forward |
| Maximum packet length | 2KB |
| Switching Capacity | 3.2G |
| Dimensions (LxWxH) | 440 x 232 x 45 mm |
| Weight | <=3.1kg |
| Fan | Fan |
| Power Input | AC: 100~240V, 50/60Hz |
| Power Output | DC: 55V/3A, 55V/4.5A, 55V/5.6A (Optional) |
| PoE(Power Over Ethernet) | |
| PoE port | Port1~16(or port 1~8) |
| PoE Power on RJ-45 | Mode A 1/2(+),3/6(-) |
| PoE Power Output | Per port 55V DC Max.32W |
| PoE Power Budget | 160W/240W/300W (Optional) |
| Environmental | |
| Operating Temperature | 0°C ~ 40 °C (32 °F ~104°F ) |
| Storage Temperature | -40 °C ~ 70 °C (-40 °F ~158°F ) |
| Operating Humidity | 10% ~ 90% non-condensing |
| Storage Humidity | 5% ~ 90% non-condensing |
Adapter information
| Power Supply | PoE Power Budget |
| 55V | 160W(8 port PSE) |
| 55V | 160W |
| 55V | 240W |
| 55V | 300W |
Ordering information
| Model | Switch port | Speed(Mbps) | PSE Port | Internal Adapter | PoE Standard |
| TS1608F-180 | 16F | 10/100 | 8 | 180W | IEEE802.3af/at |
| TS1600F-180 | 16F | 10/100 | 16 | 180W | |
| TS1600F-260 | 16F | 10/100 | 16 | 260W | |
| TS1600F-330 | 16F | 10/100 | 16 | 330W |
