TS2400G 24-port 10/100/1000Mbps PoE switch with 24 port PoE. The PoE ports can automatically detect and supply power to IEEE802.3af/at compliant Powered Devices (PD). The electrical power and data transmission on the same cable can expand your network to the places where no power lines or outlets, where you can install devices such as APs, IP cameras, or IP phones etc.
TS2400G provides a simple, cost- effective, and non-blocking wire-speed performance with 19-inch metal shape for rack deployment in office or department network application.
Features
Interface information
24 10/100/1000Mbps RJ45 ports
24 Ports PSE
PoE(Power over Ethernet)
Complies with IEEE802.3af/at Power over Ethernet
Supports PoE Power up to 32W for each PoE port
Support the two power supply modes for PoE (Mode A and Mode B)
Auto detect power device
Remote power and Data feeding up to 100m
Switch
Flow Control for Full Duplex operation and back pressure for Half Duplex Operation
8K MAC address, automatic address learning and address aging
Support Energy-Efficient Ethernet (EEE) function (IEEE802.3az)
Built-in power supply can be chosen by the customer
PoE Features
The TS2400G can provide up to 32 Watts of power to attached devices, such as VoIP phones, wireless access points; surveillance cameras etc, all over existing cat. 5cables. The switch eliminates the need for individual power sources for devices in the network, saving on costs for power cables and avoiding power outlet availability issues.
Overload Arrangement
TS2400G has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 240/300W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port(The larger port number, the lower priority).
Application
Providing 24-Port PoE in-line power interfaces, the TS2400G can easily build a power centrally-controlled IP phone system, IP Camera system and Wireless AP group for the enterprise. Cameras can be installed around the corner in the company or campus for surveillance demands. Without the powersocket limitation, the TS2400G makes the installation of cameras more easily and efficiently .
Specification
Hardware
Adapter information
Ordering information
TS2400G provides a simple, cost- effective, and non-blocking wire-speed performance with 19-inch metal shape for rack deployment in office or department network application.
Features
Interface information
24 10/100/1000Mbps RJ45 ports
24 Ports PSE
PoE(Power over Ethernet)
Complies with IEEE802.3af/at Power over Ethernet
Supports PoE Power up to 32W for each PoE port
Support the two power supply modes for PoE (Mode A and Mode B)
Auto detect power device
Remote power and Data feeding up to 100m
Switch
Flow Control for Full Duplex operation and back pressure for Half Duplex Operation
8K MAC address, automatic address learning and address aging
Support Energy-Efficient Ethernet (EEE) function (IEEE802.3az)
Built-in power supply can be chosen by the customer
PoE Features
The TS2400G can provide up to 32 Watts of power to attached devices, such as VoIP phones, wireless access points; surveillance cameras etc, all over existing cat. 5cables. The switch eliminates the need for individual power sources for devices in the network, saving on costs for power cables and avoiding power outlet availability issues.
Overload Arrangement
TS2400G has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 240/300W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port(The larger port number, the lower priority).
Application
Providing 24-Port PoE in-line power interfaces, the TS2400G can easily build a power centrally-controlled IP phone system, IP Camera system and Wireless AP group for the enterprise. Cameras can be installed around the corner in the company or campus for surveillance demands. Without the powersocket limitation, the TS2400G makes the installation of cameras more easily and efficiently .
Specification
Hardware
| Standard | IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at |
| Network Media(Cable) | 10BASE-T: UTP category 3,4,5 cable (≤100m) 100BASE-TX: UTP category 5,5e cable (≤100m) 1000BASE-T: UTP category 5e,6 cable(≤100m) |
| LED | System: Power (Green) Per port: PoE (Orange) LINK/ACT: 10/100M (Orange) 1000M(Green) |
| MAC Address Table | 8K, Auto-learning, Auto-aging |
| Transfer mode | Store-and-Forward |
| Maximum packet length | 9KB |
| Switching Capacity | 48G |
| Dimensions (LxWxH) | 440 x 232 x 45 mm |
| Weight | |
| Fan | Fan |
| Power Input | AC: 100~240V, 50/60Hz |
| Power Output | DC: 55V/ 4.5A, 55V /5.6A (Optional) |
| PoE(Power Over Ethernet) | |
| PoE port | Port1~24 |
| PoE Power on RJ-45 | Even port: Mode A 1/2(+),3/6(-)(Port:2,4,6,8,10,12,14,16,18,20,22,24) Odd port: Mode B 4/5(+), 7/8(-)(Port:1,3,5,7,9,11,13,15,17,19,21,23) |
| PoE Power Output | Per port 55V DC Max.32W |
| PoE Power Budget | 240W/300W (Optional) |
| Environmental | |
| Operating Temperature | 0°C ~ 40 °C (32 °F ~104°F ) |
| Storage Temperature | -40 °C ~ 70 °C (-40 °F ~158°F ) |
| Operating Humidity | 10% ~ 90% non-condensing |
| Storage Humidity | 5% ~ 90% non-condensing |
Adapter information
| Power Supply | PoE Power Budget |
| 55V | 240W |
| 55V | 300W |
Ordering information
| Model | Switch port | Speed(Mbps) | PSE Port | Internal Adapter | PoE Standard |
| TS2400G-260 | 24G | 10/100/1000 | 24 | 260W | |
| TS2400G-330 | 24G | 10/100/1000 | 24 | 330W |
