TS2008P PoE switch, provides 8*10/100/1000Mbps RJ45 ports all ports with PoE injector function support auto-MDI/MDI-X per port output 15.4W (Max.),complies with IEEE802.3af standard.
8*10/100/1000Mbps PoE port, all with PoE injector
Complies with IEEE 802.3af PoE standards
Auto-MDI / MDI-X detection on each RJ-45 port
Support 10/100M/1000Mbps N-way auto-negotiation
4K MAC address table, automatic source address learning& aging
Specification
8*10/100/1000Mbps PoE port, all with PoE injector
Complies with IEEE 802.3af PoE standards
Auto-MDI / MDI-X detection on each RJ-45 port
Support 10/100M/1000Mbps N-way auto-negotiation
4K MAC address table, automatic source address learning& aging
Specification
| Specification | |
| Standards | IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3X 1000BASE-TX IEEE802.3af POE |
| Data rate | Ethernet: 10Mbps(half-duplex mode),20Mbps (full-duplex) Fast Ethernet: 100Mbps (half-duplex mode) ,200Mbps (full-duplex ) 1000Mbps (half-duplex mode) ,2000Mbps (full-duplex ) |
| Topological structure | Star structure |
| Network Media (Cable) | 10Base-T: UTP category 3, 4, 5 cable (Max 100m), EIA/TIA-568 100Ω STP (Max 100m), 100Base-Tx: UTP category 5, 5e cable (Max 100m), 1000Base-Tx: UTP category 5E, 6 cable (Max 100m), EIA/TIA-568 100Ω STP (Max 100m) |
| Port | POE (10/100/1000Mbps) x 8 |
| Switching Capacity | 16Gbps |
| PoE Specification | Input 48V DC, Output 15.4Watts (Max.) per PoE port PIN definition : 4/5(+), 7/8(-) |
| LED indicators | Power, LINK/ ACT,MIL |
| MAC Address | 4K, Auto-learning & aging |
| Frame Filtering Rate & Forward Rate | 10BASE-T:14880pps / port 100BASE-TX:148810pps / port |
| Power Consumption | 9.5Watts (No Load),120W (Full Load) |
| Environment | Operating Temperature: 0~40°C Storage Temperature: -40~70°C Operating Humidity: 10%~90% non-condensing. Storage humidity: 5%~90% non-condensing |
