Minid DV
It has small contour design, which does UV spray finishing for the whole body. It is very fashionable and wearable and matches with all kinds of portable tools.
Support PC camera and chatting function.
Support AVI video format.
It can carry out high definition image recording under low illumination.
Support 30 fps for 720*480
Support USB1.1 and USB2.0.
Support 16GB T-flash card. (maximum)
Build-in lithium battery which can make a video more than 75 minute(one equal capacity battery free)
Operation Guide
1. Charge
The battery is built-in lithium rechargeable battery, so when you use it the first time, please charge firstly. The method for charging as following:
1. ) Connect computer: Use USB cable to connect the computer, then it can be charged.
2. ) Use adaptor: Connect charger plug with USB cable, then plug into electrical connector receptacle, it can be charged.
Notice: When battery power is not enough, MINI DV will enter into protection mode, so it cannot be turn on. Now, please charge for it.
2. Boot-strap/ Sound control video
Please confirm already insert the TF card in the slot.
Push "ON/OFF" button to "ON", Press "M" to starting up the product. Red indicator light begins to bright, now it enters into Enter sonic video standby mode, Means the product on directly default for sonic video modes after startup, MINI DV will automatic video recording When the voice more than 60 decibels. Red indicator light often bright and Blue indicator light flashing slowly, start video recording, Each video recording the shortest time for 120 seconds, After 120 second, MINI DV will Continuous recording when the voice continue more than 60 dB; MINI DV will goes to standby mode when haven't 60 dB voice.
The resolution for video file is 720 * 480, and frame number is 29--30fps/S.
3. Camera shooting
Push "ON/OFF" button to "ON", Press "M" to starting up the product. Red indicator light begins to bright, now it enters into Enter sonic video standby mode. Press "M", switch to Video mode. Then press "Record/stop" button, Red indicator light often bright and Blue indicator light flashing quickly, MINI DV began shooting. Then press "Record/stop" button, MINI DV standby and save the file. If need Photographing again, please press" Record/Stop" again.
The resolution for video file is 720 * 480, and frame number is 29--30fps/S.
4. Take Photos
Push "ON/OFF" button to "ON", Press "M" to starting up the product. Red indicator light begins to bright, now it enters into Enter sonic video standby mode. Press "M", switch to Video mode. Press "M" again, (Means: After startup Continuous press twice), switch to photographed model, Now press " Record/stop" button to start take photo. Red indicator light often bright, Blue indicator light flash once. Each take a photo, the blue indicator light flash once. The camera resolution is 1280*1240.
5. Separate sound recording
Push "ON/OFF" button to "ON", Press "M" to starting up the product. Red indicator light begins to bright now it enters into Enter sonic video standby mode. Press "M" once, Into the video model; Press "M" twice, Into the photographed model; Press "M" three times, Into the separate sound recording model. (Means: After startup Continuous press three times). Now press" Record /Stop" button start recording, at the same time, Both of Red indicator light and Blue indicator light are often bright, Into the Recording condition. Then Press " Record/Stop" to pause.
It has small contour design, which does UV spray finishing for the whole body. It is very fashionable and wearable and matches with all kinds of portable tools.
Support PC camera and chatting function.
Support AVI video format.
It can carry out high definition image recording under low illumination.
Support 30 fps for 720*480
Support USB1.1 and USB2.0.
Support 16GB T-flash card. (maximum)
Build-in lithium battery which can make a video more than 75 minute(one equal capacity battery free)
Operation Guide
1. Charge
The battery is built-in lithium rechargeable battery, so when you use it the first time, please charge firstly. The method for charging as following:
1. ) Connect computer: Use USB cable to connect the computer, then it can be charged.
2. ) Use adaptor: Connect charger plug with USB cable, then plug into electrical connector receptacle, it can be charged.
Notice: When battery power is not enough, MINI DV will enter into protection mode, so it cannot be turn on. Now, please charge for it.
2. Boot-strap/ Sound control video
Please confirm already insert the TF card in the slot.
Push "ON/OFF" button to "ON", Press "M" to starting up the product. Red indicator light begins to bright, now it enters into Enter sonic video standby mode, Means the product on directly default for sonic video modes after startup, MINI DV will automatic video recording When the voice more than 60 decibels. Red indicator light often bright and Blue indicator light flashing slowly, start video recording, Each video recording the shortest time for 120 seconds, After 120 second, MINI DV will Continuous recording when the voice continue more than 60 dB; MINI DV will goes to standby mode when haven't 60 dB voice.
The resolution for video file is 720 * 480, and frame number is 29--30fps/S.
3. Camera shooting
Push "ON/OFF" button to "ON", Press "M" to starting up the product. Red indicator light begins to bright, now it enters into Enter sonic video standby mode. Press "M", switch to Video mode. Then press "Record/stop" button, Red indicator light often bright and Blue indicator light flashing quickly, MINI DV began shooting. Then press "Record/stop" button, MINI DV standby and save the file. If need Photographing again, please press" Record/Stop" again.
The resolution for video file is 720 * 480, and frame number is 29--30fps/S.
4. Take Photos
Push "ON/OFF" button to "ON", Press "M" to starting up the product. Red indicator light begins to bright, now it enters into Enter sonic video standby mode. Press "M", switch to Video mode. Press "M" again, (Means: After startup Continuous press twice), switch to photographed model, Now press " Record/stop" button to start take photo. Red indicator light often bright, Blue indicator light flash once. Each take a photo, the blue indicator light flash once. The camera resolution is 1280*1240.
5. Separate sound recording
Push "ON/OFF" button to "ON", Press "M" to starting up the product. Red indicator light begins to bright now it enters into Enter sonic video standby mode. Press "M" once, Into the video model; Press "M" twice, Into the photographed model; Press "M" three times, Into the separate sound recording model. (Means: After startup Continuous press three times). Now press" Record /Stop" button start recording, at the same time, Both of Red indicator light and Blue indicator light are often bright, Into the Recording condition. Then Press " Record/Stop" to pause.
