It is specially designed for high-speed, engraving and the large extended raising
| It is specially designed for high-speed, engraving and the large extended raising | ||
| Type | SIC-L400 | |
| Laser power | 40W | |
| Engraving Area (mm) | 300*400mm | |
| Laser type | CO2 Laser tube | |
| Cutting depth | acryl 0-20mm | |
| Engraving speed | 0-1000mm/s | |
| Cutting speed | 0-600mm/s | |
| Resetting positioning accuracy | <0.01mm | |
| Maximum forming character | English:1.5 x 1.5mm | |
| Power supply | 220V±10% 50HZ or 110V±10% 60HZ | |
| Software supported | ArtCut, CorelDraw, PhotoShop, AutoCAD | |
| Graphic format supported | PLT, DXF, BMP, JPG, GIF, PGN, TIF | |
| Engraver for Curve surfaces | we can provide rotary system so as to engrave on curse surfaces | |
| Maximum Height of Materials to Engrave | 280mm(by motor) | |
| Laser tube(life hours) | 1500 hours | |
| Optional Spare Parts | RF Laser Tube | SYNRAD laser tube |
| Recommended Spare Parts/Consumables | Laser Tube and Lens | |
| Package |
1240*500*450 In Plywood case |
|
| Net Weight | 60kgs | |
| Gross Weight | 85kgs | |
| Aluminum alloy worktable |
You may choose any one between the two (Hoistable platform need add: USD200.00) |
|
| Motorized up/down table | ||
| 1 Laser Tubes and 1 laser Power Supply | Yes | |
| Wate -cooling System | Yes | |
| 1 x lens and 1x set with 3 mirros | Yes | |
| 1x air pumpe and 1 x water pumpe | Yes | |
| Red point | Yes | |
| Ray inspection system | Yes | |
| 1 x Exhaust Fan | Yes | |
