Small is beauty! Our mini laser is a state of the art, it is small, but it is also powerful in his function, we provide a lot of accessory to power their performance.
Desktop structure, the ultimate thin of height is only 39CM, you can pass the most narrow door in the world.
Light weight design, the net weight is only 80kgs, a strong man can carry it easily.
Selected high quality component ensure its high performance: USA micro step motor, Japan linear guiding track, 64DSP controller, Built-in 128MB memory inside machine, computer design and control. With lots of accessory for customer high end requirement.
Laser engraving machines special features:
1.64 DSP high speed processor: It adopts 64 DSP high speed control system, which highly improved the data processing speed and stability.
2. Optimization of Arc engraving: The laser machine uses the arc processing system, this technology can perfectly deal the curve and circular arc, which can cut the edge smoothly.
3. Support of USB connection and U Disk: Our laser machine supports two kinds of connection patterns, the first way is the USB to connect the machine with computer directly, the second way is to adopt the U Disk independently, this way you can use only one computer to control many laser machines, which save your resource.
4. Storage function: Our controlling board could store more than 100 files.
5. Real time regulation: You can adjust the laser power automatically or manually, so that it can improve the engraving effect easily.
6. Easy operation: Both our software and machine are easy to operate.
7. Configuration fine: Our linear guide seat is one-time molding by aluminum material, difficult for distortion. Our linear guide rail, idler wheels and bearings are from Japan and Taiwan, which make the machine works very stably and precisely.
8. Automatic Protection: There is automatic smoke dust ejecting system, water cooling system, if there is no water or the water flows in opposite direction, there will be no laser, which protects the laser tube in an effective way.
Our advantages:
1. The most competitive prices
During these years, we care about costs saving and controlling very much. Other manufacturers spend more money on advertisement, however we spend more on quality controlling and improvements. We always adhere to provide the most competitive prices to our customers.
2. The stable quality and strict quality control
We spend more on quality control and improvements to provide the best quality machines to our customers. We have strict each procedure quality control rules to make sure stable and the best quality. Other manufacturers rely on advertisement to earn customers, however we earn both old and new customers by the best and most stable quality.
3. Our professional technical team
We have more than 8 skilled engineers with more than 10 years' experience in laser machine industry. Because we respect technology and pay more attation to machines development, more and more skilled engineers choose to work with us.
4. Efficient after-sale service
And 12 professional technicians are in charge of both domestic and oversea after-sale service. We provide 24h online after-sale service!
Our skilled technicians could be sent to you as soon as possible if need.
We could train you and your techinicians free of charge.
5. High OEM ability
We have the ability to provide the OEM services: Machine functions, machine working areas, machine design, machine size, machine color, new machine designing and development and so on.
6. Precise Delivery time
We have strict rules to make sure precise delivery of machines on time.
Our kinds of laser engraving machines types:
Desktop structure, the ultimate thin of height is only 39CM, you can pass the most narrow door in the world.
Light weight design, the net weight is only 80kgs, a strong man can carry it easily.
Selected high quality component ensure its high performance: USA micro step motor, Japan linear guiding track, 64DSP controller, Built-in 128MB memory inside machine, computer design and control. With lots of accessory for customer high end requirement.
Laser engraving machines special features:
1.64 DSP high speed processor: It adopts 64 DSP high speed control system, which highly improved the data processing speed and stability.
2. Optimization of Arc engraving: The laser machine uses the arc processing system, this technology can perfectly deal the curve and circular arc, which can cut the edge smoothly.
3. Support of USB connection and U Disk: Our laser machine supports two kinds of connection patterns, the first way is the USB to connect the machine with computer directly, the second way is to adopt the U Disk independently, this way you can use only one computer to control many laser machines, which save your resource.
4. Storage function: Our controlling board could store more than 100 files.
5. Real time regulation: You can adjust the laser power automatically or manually, so that it can improve the engraving effect easily.
6. Easy operation: Both our software and machine are easy to operate.
7. Configuration fine: Our linear guide seat is one-time molding by aluminum material, difficult for distortion. Our linear guide rail, idler wheels and bearings are from Japan and Taiwan, which make the machine works very stably and precisely.
8. Automatic Protection: There is automatic smoke dust ejecting system, water cooling system, if there is no water or the water flows in opposite direction, there will be no laser, which protects the laser tube in an effective way.
Our advantages:
1. The most competitive prices
During these years, we care about costs saving and controlling very much. Other manufacturers spend more money on advertisement, however we spend more on quality controlling and improvements. We always adhere to provide the most competitive prices to our customers.
2. The stable quality and strict quality control
We spend more on quality control and improvements to provide the best quality machines to our customers. We have strict each procedure quality control rules to make sure stable and the best quality. Other manufacturers rely on advertisement to earn customers, however we earn both old and new customers by the best and most stable quality.
3. Our professional technical team
We have more than 8 skilled engineers with more than 10 years' experience in laser machine industry. Because we respect technology and pay more attation to machines development, more and more skilled engineers choose to work with us.
4. Efficient after-sale service
And 12 professional technicians are in charge of both domestic and oversea after-sale service. We provide 24h online after-sale service!
Our skilled technicians could be sent to you as soon as possible if need.
We could train you and your techinicians free of charge.
5. High OEM ability
We have the ability to provide the OEM services: Machine functions, machine working areas, machine design, machine size, machine color, new machine designing and development and so on.
6. Precise Delivery time
We have strict rules to make sure precise delivery of machines on time.
Our kinds of laser engraving machines types:
| Mini Laser engraving machine technical Index: | |
| Model: | J&C-4030 |
| Working Area: | 300mmx400mm (could be customerized) |
| Functions: | engraving and/or cutting |
| Number of Laser Heads: | 1 head |
| Laser Generator: | Glass Co2 laser tube or imported metal tube |
| Laser power: | 30w-60w optional |
| Driving System: | Stepping motor |
| Control System: | 64 Bit DSP |
| PC Interface: | USB 2.0 Port, USB disk |
| Cutting thickness: | 0-10mm(Determined by materials) |
| Engraving Speed: | 0-64000mm/min |
| Resolution ratio: | <=4000dpi |
| Location Precision: | <0.05mm |
|
Minimum shaping character: |
Chinese 2x2mm;letters 1x1mm |
| Power supply: | AC 220V,50-60HZ |
| Gross Power: | <1250w |
| Working temperature: | 0-45 degree centigrade |
| Working humidity: | 5-95% |
| Coolling method: | Water |
| Red pointer: | Optional |
| Machine color: | Could be customerized |
| Machine shape: | Could be customerized |
| Graphic format supported: | BMP,GIF,JPEG,PCX,TGA,TIFF,PLT,CDR,DMG,DXF |
| Measurement: | 1160*950*1180mm |
| Net Weight: | 80 kgs |
| Accessories: | Chiller, air pump, exhaust blower |
| Packing Method: | Plywooden case |
| Port of Loading: | Shenzhen,China |
| Delivery date: | 3-5 days |
| Payment Term: | T/T, LC,DP,West Union,Escrow,Moneygram and other payment terms |
| Applicable materials: |
Cloth,Fabric,Leather,Wool,Acrylic,Wooden product,Plastic products, Rubber, Crystal, Ceramic tile,Jade,Epoxy resin, PVC plate and other materials |
| Applicable Industry: |
Garment,Leather,Cloth toys,Embroidey and clipping,Mould, Arts and crafts, Advertisement,Decoration,building upholster, Packing, printing,Paper products and other industries. |
