Energy-Saving Heatproof Roof Tile Machine
1. Equipment features
1) Less laborers are needed, labor intensity is small, and working environment is good without formaldehyde contamination.
2) High production efficiency, greatly enhanced equipment capacity.
3) Low power, low failure rate. Stable performance, low probability of failure, and can perform continuous production.
4) The same machine can produce tiles, insulation tiles and other products.
2. Equipment advantages
Less laborers needed; High production efficiency; Low energy consumption; A machine can produce varieties of products after the replacement of different molds.
Production
1. Production raw materials
Production raw materials: Stone powder (fly ash, construction debris, quartz sand, sand), plant fiber (straw, sawdust, corn stalks, cotton stalks), and inorganic binder, etc., which are environmentally friendly.
2. Production technological process
Production process: Ingredients (raw materials) — — Mixing and stirring — — Extrusion to form shape — — Curing — — Demoulding — — Cutting — — Maintenance — — Glazing — — Test factory
1. Equipment features
1) Less laborers are needed, labor intensity is small, and working environment is good without formaldehyde contamination.
2) High production efficiency, greatly enhanced equipment capacity.
3) Low power, low failure rate. Stable performance, low probability of failure, and can perform continuous production.
4) The same machine can produce tiles, insulation tiles and other products.
2. Equipment advantages
Less laborers needed; High production efficiency; Low energy consumption; A machine can produce varieties of products after the replacement of different molds.
Production
1. Production raw materials
Production raw materials: Stone powder (fly ash, construction debris, quartz sand, sand), plant fiber (straw, sawdust, corn stalks, cotton stalks), and inorganic binder, etc., which are environmentally friendly.
2. Production technological process
Production process: Ingredients (raw materials) — — Mixing and stirring — — Extrusion to form shape — — Curing — — Demoulding — — Cutting — — Maintenance — — Glazing — — Test factory
| Equipment Parameters | ||||
| Equipment Type |
Equipment Capacity (m²/Day) |
Equipment Specification (Length × Width × Height m) |
Weight (Ton) |
Power (KW) |
| HQRT-15 | 3000~3500 | 18×1.5×1.5 | 7 | 30 |
| HQRT-20 | 1500~1800 | 15×1.5×1.5 | 5 | 20 |
| Production Conditions | ||||||||
| Equipment Type |
Equipment Capacity (m²/Day) |
Plant Needed (m²) |
Site Needed (m²) |
Industrial Water Use (Ton/Day) |
Industrial Power Use (KWh/Day) |
Laborers (Person/Class) |
Production Cost (CNY/m²) |
Raw Materials |
| HQRT-15 | 3000~3500 | 1000~1500 | 500~600 | 13~15 | 270~300 | 8~10 | 10~13 | Stone powder, fly ash, plant fiber and other agricultural waste, inorganic adhesives |
| HQRT-20 | 1500~1800 | 500~800 | 300~400 | 8~10 | 180~200 | 6~8 |
10~13 |
|
