Our products have been exported to Asia, South America, North America, Eastern Europe, Western Europe, Africa, Oceania, Middle East, Russia, etc.
Brief description & Advantage
1, 10 years block machine manufacture&sale experience
2, Full-auto by PLC
3, Table&Mouldbox vibrating
4, Provide local guide
Place of Origin: Beijing, China (Mainland)
Brand Name: ZCJK
Model Number: QTY9-18
Type: Standard, hollow, road brick making machine
Processing: Brick Production Line
Brick Raw Material: Concrete, fly ash, moutain flour, etc.
Method: Hydraulic Pressure
Automatic: Yes
Capacity: 80, 000PCS/ 8 hours
Power: 42kw
Vibrating force: 80KN
Cycle time: 15~18s
Dimensions: 8300*4400*2950
Installed capacity: 100kVA
Weight: 13.5T
Equipment Superiority
1. Omnibearing vibration of table and mold improves the density of bricks. In order to get even transmission of vibration force, two-way mode is adopted in the lower vibration with two vibration tanks linked to each other by two hydraulic motors.
2. The material feeder with a spiral reticulation structure distributes materials evenly, which shortens the operation time and then the mold cycling time.
3. Due to its multi-function and advanced technology, it can be applied to produce various types of concrete blocks, standard bricks, perforated bricks and paving bricks. These products are of good quality, high compression strength and accurate dimension. Besides, more kinds can be produced such as color paving bricks, color grassland bricks and curb bricks if the secondary distributing device is added to the line.
4. The main frame is wide for the convenience of mold filling, so more blocks can be made. In order to get even pressure, three oil reservoirs are used, which raise the pressure to as high as 100t. Moreover, the smallest reservoir in the middle increases the operating speed of the left and right ones respectively, thus improving the productivity.
5. It is applicable to sand, stone chips, slag, coal dust, fly coal ash, furnace slag and construction waste etc.
6. This machine with an integration of mechanism, electronics and hydraulics is automatically controlled by the PLC computer, which supervises every phase through the whole course. Once fault is detected, the machine can lock itself. Meanwhile, output statistics is made by the computer. Thus, it holds a leading position for its outstanding performance in terms of environmental protection.
Brief description & Advantage
1, 10 years block machine manufacture&sale experience
2, Full-auto by PLC
3, Table&Mouldbox vibrating
4, Provide local guide
Place of Origin: Beijing, China (Mainland)
Brand Name: ZCJK
Model Number: QTY9-18
Type: Standard, hollow, road brick making machine
Processing: Brick Production Line
Brick Raw Material: Concrete, fly ash, moutain flour, etc.
Method: Hydraulic Pressure
Automatic: Yes
Capacity: 80, 000PCS/ 8 hours
Power: 42kw
Vibrating force: 80KN
Cycle time: 15~18s
Dimensions: 8300*4400*2950
Installed capacity: 100kVA
Weight: 13.5T
Equipment Superiority
1. Omnibearing vibration of table and mold improves the density of bricks. In order to get even transmission of vibration force, two-way mode is adopted in the lower vibration with two vibration tanks linked to each other by two hydraulic motors.
2. The material feeder with a spiral reticulation structure distributes materials evenly, which shortens the operation time and then the mold cycling time.
3. Due to its multi-function and advanced technology, it can be applied to produce various types of concrete blocks, standard bricks, perforated bricks and paving bricks. These products are of good quality, high compression strength and accurate dimension. Besides, more kinds can be produced such as color paving bricks, color grassland bricks and curb bricks if the secondary distributing device is added to the line.
4. The main frame is wide for the convenience of mold filling, so more blocks can be made. In order to get even pressure, three oil reservoirs are used, which raise the pressure to as high as 100t. Moreover, the smallest reservoir in the middle increases the operating speed of the left and right ones respectively, thus improving the productivity.
5. It is applicable to sand, stone chips, slag, coal dust, fly coal ash, furnace slag and construction waste etc.
6. This machine with an integration of mechanism, electronics and hydraulics is automatically controlled by the PLC computer, which supervises every phase through the whole course. Once fault is detected, the machine can lock itself. Meanwhile, output statistics is made by the computer. Thus, it holds a leading position for its outstanding performance in terms of environmental protection.
| Land area | 1000m²(workshop:500m²,Warehouse:800m²,Office:100m²,Space:8600m²) |
| Workers | 8 people |
| Water and power consumption | Water:12t /day Power: 380v |
| Total installed capacity | 85kw |
| Environmental protection | It conforms to environmental protection standard with no waste water,slag and waste gas in the production process. |
| Technical Specifications | |
| Production capacity | Hollow brick 390*190*190mm 9pcs/mould |
| Standard brick 240*115*53mm 50pcs/mould | |
| Road brick 0.6m2/mould | |
| Cycle time | 15-18s |
| Shift output | Hollow brick 390*190*190mm 14400pcs/8 hours |
| Standard brick 240*115*53mm 80000pcs/8 hours | |
| Road brick 960m2/8 hours | |
| Vibrating force | 80KN |
| Power | 42kw |
| Weight | 13.5T |
| Dimensions | 8300*4400*2950mm |
| moulding area | 1280x600mm |
| Workshop | 500m2 |
| Installed capacity | 100KVA |
| Items Included | |
| Component of production line | Quantity |
| QTY9-18 Block Making Machine | 1 |
| Automatic brick conveyor machine | 1 |
| Automatic pallet feeder | 1 |
| Hydraulic unit | 1 |
| Control system(German Siemens) | 1 |
| Conveyer Belt | 1 |
| JS750 Mixer | 1 |
| Elevator/ Lowerator | 1 |
| Three-stage batching system(electronic calculation) | 1 |
| Free mould | 1 |
| Manual hydraulic forklift | 2 |
