CE Certificate Drawing Automatic Pneumatic Heat Press Machine T-Shirt Heat Transfer Machine STC-QD08
SPECIFICATION:
APPLICATION:
This T-shirt heat press machine can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics,glasses and textiles such as cotton, flax,chemical fiber, nylon, ect. The machine can also conduct some heat treatments such as hair-planting print, vesicant print and conglutination of cloth lining and cloth under low temperature and low pressure. It can be used for T-shirts, mouse mats,sports clothes,swimwear,bags,scarves ,logo ,umbrella,pillow,socks, jigsaw puzzles, ceramic tiles, ID badges,,vip card,personalized gifts,stone rock painting,rhinestone,flocking,glass,metal sheet,aluminum sheet,and so on.and just about every other flat surface item you may want to dye sublimation for.
PRODUCT DISPLAY:
FEATURES:
1.CE approved heat press machine.high quality as well as good price,good after-sale service.
2.The machine adopted automatic pneumatic fitting pressure, it can transfer the lower pressure to higher compress pressure.(pressure up to 8kg/cm2).
3.Manual and automatic control ,pull-out worktable,easy operation,high printing,it is economical and practical.
4.This machine adopts thicken heat plate to ensure the temperature more equality and steady .ferfect heat press effect.
5. The pressure can be adjusted according to the thickness of the material you're transfering to. Including print the ready made clothes and cut pieces ,it can be widely used in the factory mass-production and personalized pyrograph of retail shops.
OPERATION VIDIO LINK:
http://www.tudou.com/programs/view/HorhJhzKFu4/
Read Before operating:
1.Check the voltage before using it. Then turn on the machine and turn on the power supply!
2.Avoid touch the heat press plate when you operating in case be injured.
3.Keep children away from the machine even when the machine is left unused!!!
Operation procedures
please note:Users should operate the machine with ground wire connected for safety!
1.Plug in, turn on the power switch, the power indicator lightened.
2.Set the thermostat to the temperature needed (Normally 120-200ºC),set the timer to the needed.(Normally 5~20Second),then wait for until the temperature has reached the preset temperature.
3.Put the cloth on the silica gel plate of the working table, cover the printing paper(please note the right surface of the paper).
4.Press the start switch,you will see the machine is working and the time is counting down .
5.When the time come down to over, the heating plate will raise automatically.you will find the beautiful and attractive effect!
6..If it is cold-ripping of the transfer paper, please use
blackboard wiper to rub against the whole transfer paper, wait for
5-10 seconds, then rip off the transfer paper. If it is the hot-
ripping of the transfer paper, you can rip off immediately after
printing.
Please Note : Successful print requires right time ,temperature
and pressure ,the thickness of the clothes material ,even the
type of printing paper ,all will affect the performance of
printing .Any kind of sublimation paper need test before mass
production.
HEAT PRINTING DEFFECT PICTURE:
WARRANTY:
You can rest assured ,we offer good after-sale
service: the machine enjoy one year warranty ,life-
long maintenance service and Life-long on-line
technical support, and provide free parts when
problems occur within one year not including shipping
cost. we also offer good quality: All the machine of
our factory have been approved by CE.
Payment Terms:
L/C,D/A,D/P,T/T,Western Union,MoneyGram,Paypal.
30%deposit,the balance 70% will be paid before shipping.
Delivery Detail:
7 days after you confirming order.
PACKAGING:
The packing will be made according to your requirements. Usually
we have safe packing method as below:
This Heat press machine will have PVC bag and foam inside,
wooden case outside. The method are very safe shipping
packing method.
SHIPPING:
This equipment is heavy, you'd better choose sea delivery.
1,If you have your own shipping agent, then we will contact with them and make sure the shipping details for you .
2, In case of you don't have your own shipping agent, don't worry, we will ask our shipping agent to do all the things for you.
3. After we ship the machine, we will give you the documents right now.
4. you need to go to your nearest seaport to take your goods, delivery time usually 15-40days. For more details, please contact with us.
MAINTENANCE:
1.Pressure:If the pressure is not big enough,adjust the
handle of the pressure filter,clockwise direction increase the pressure,anti-clockwise decrease the pressure.
2.Time:When the seted time finish,but the heating plate
doesn't return to the top.
1)Check the air pressure if it is normal.
2)Check the electric wire if it get damage.
3.Temperature:When the seted time finish, and the
machine's indication light is bright,but the heating plate is
not hot,please check the circuit.
4.The pressure of the machine is not allowed to be adjusted
too large, in case cause damage to bearing.
5.If any quality problem please contact our company.
About Our Factory:
1.)Dong guan STC Machinery Co., Ltd is a professional producer factory for all kinds of heat press machine, heat transfer machine, sublimation heat transfer press machines. etc. it also is one of the biggest factory of heat press machine in CHINA.
2) We in this area more than 9 years, very professional and experienced.
3) Located in Chang'an town,dongguan city, we possess CE certificate.
Warmly welcomed to China to visit our office & factory, for any further more informations, please feel free to contact us.
CONTACT INFORMATION:
Contact person: Ms.Tina Yao
Mobile:+86-13058526550
TEL:+86-0769-85426311-810
English website : http://stcheatpress.en.made-in-china.com
Chinese website1: http://guizaichd.1688.com
Chinese website2: http://stcby.taobao.com
Eagle Wealth Enterprise Limited
Dongguan STC Machinery Equipment Co.,Ltd
Address: Jinsha East Road,The Fourth Industrial Zone,Xiagang,Chang'an Town, Dongguan City,Guangdong Province,China
SPECIFICATION:
Drawing Automatic Pneumatic Heat Press Machine | |||
Item No. | STC-QD08 | Voltage | 110V/220V |
Temperature range | 0-399 °C | Time range | 0-999Sec |
Power | 2800w | 3000w | 3500w |
Weight | 80kg | 85kg | 90kg |
Packing size | 90*50*90cm | 90*60*90cm | 90*68*90cm |
Working size | 40*40cm | 40*50cm | 40*60cm |
Drawing Automatic Pneumatic Heat Press Machine | |||
Item No. | STC-QD08 | Voltage | 110V/220V |
Temperature range | 0-399 °C | Time range | 0-999Sec |
Power | 4500w | 5000w | 6000w |
Weight | 110kg | 140kg | 170kg |
Packing size | 100*80*95cm | 105*85*98cm | 110*95*100cm |
Working size | 50*60cm | 50*70cm | 60*80cm |
Drawing Automatic Pneumatic Heat Press Machine | |||
Item No. | STC-QD08 | Voltage | 110V/220V |
Temperature range | 0-399 °C | Time range | 0-999Sec |
Power | 6000w | 6500W | |
Weight | 200kg | 230Kg | |
Packing size | 117*129*112cm | 127*138*122cm | |
Working size | 50*120cm | 60*130cm | |
APPLICATION:
This T-shirt heat press machine can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics,glasses and textiles such as cotton, flax,chemical fiber, nylon, ect. The machine can also conduct some heat treatments such as hair-planting print, vesicant print and conglutination of cloth lining and cloth under low temperature and low pressure. It can be used for T-shirts, mouse mats,sports clothes,swimwear,bags,scarves ,logo ,umbrella,pillow,socks, jigsaw puzzles, ceramic tiles, ID badges,,vip card,personalized gifts,stone rock painting,rhinestone,flocking,glass,metal sheet,aluminum sheet,and so on.and just about every other flat surface item you may want to dye sublimation for.
PRODUCT DISPLAY:
FEATURES:
1.CE approved heat press machine.high quality as well as good price,good after-sale service.
2.The machine adopted automatic pneumatic fitting pressure, it can transfer the lower pressure to higher compress pressure.(pressure up to 8kg/cm2).
3.Manual and automatic control ,pull-out worktable,easy operation,high printing,it is economical and practical.
4.This machine adopts thicken heat plate to ensure the temperature more equality and steady .ferfect heat press effect.
5. The pressure can be adjusted according to the thickness of the material you're transfering to. Including print the ready made clothes and cut pieces ,it can be widely used in the factory mass-production and personalized pyrograph of retail shops.
OPERATION VIDIO LINK:
http://www.tudou.com/programs/view/HorhJhzKFu4/
Read Before operating:
1.Check the voltage before using it. Then turn on the machine and turn on the power supply!
2.Avoid touch the heat press plate when you operating in case be injured.
3.Keep children away from the machine even when the machine is left unused!!!
Operation procedures
please note:Users should operate the machine with ground wire connected for safety!
1.Plug in, turn on the power switch, the power indicator lightened.
2.Set the thermostat to the temperature needed (Normally 120-200ºC),set the timer to the needed.(Normally 5~20Second),then wait for until the temperature has reached the preset temperature.
3.Put the cloth on the silica gel plate of the working table, cover the printing paper(please note the right surface of the paper).
4.Press the start switch,you will see the machine is working and the time is counting down .
5.When the time come down to over, the heating plate will raise automatically.you will find the beautiful and attractive effect!
6..If it is cold-ripping of the transfer paper, please use
blackboard wiper to rub against the whole transfer paper, wait for
5-10 seconds, then rip off the transfer paper. If it is the hot-
ripping of the transfer paper, you can rip off immediately after
printing.
Temperature & Time | |||||
Materials | Temperature | Time | |||
| Sublimation heat press printing | 200-220°C | 25s | |||
| Plastic sheet heat press printing | 160-180°C | 8-10s | |||
| Foaming material heat press printing | 140-160°C | 5-8s | |||
| rhinestone heat press printing | 180°C | 10-12s | |||
Please Note : Successful print requires right time ,temperature
and pressure ,the thickness of the clothes material ,even the
type of printing paper ,all will affect the performance of
printing .Any kind of sublimation paper need test before mass
production.
HEAT PRINTING DEFFECT PICTURE:
WARRANTY:
You can rest assured ,we offer good after-sale
service: the machine enjoy one year warranty ,life-
long maintenance service and Life-long on-line
technical support, and provide free parts when
problems occur within one year not including shipping
cost. we also offer good quality: All the machine of
our factory have been approved by CE.
Payment Terms:
L/C,D/A,D/P,T/T,Western Union,MoneyGram,Paypal.
30%deposit,the balance 70% will be paid before shipping.
Delivery Detail:
7 days after you confirming order.
PACKAGING:
The packing will be made according to your requirements. Usually
we have safe packing method as below:
This Heat press machine will have PVC bag and foam inside,
wooden case outside. The method are very safe shipping
packing method.
SHIPPING:
This equipment is heavy, you'd better choose sea delivery.
1,If you have your own shipping agent, then we will contact with them and make sure the shipping details for you .
2, In case of you don't have your own shipping agent, don't worry, we will ask our shipping agent to do all the things for you.
3. After we ship the machine, we will give you the documents right now.
4. you need to go to your nearest seaport to take your goods, delivery time usually 15-40days. For more details, please contact with us.
MAINTENANCE:
1.Pressure:If the pressure is not big enough,adjust the
handle of the pressure filter,clockwise direction increase the pressure,anti-clockwise decrease the pressure.
2.Time:When the seted time finish,but the heating plate
doesn't return to the top.
1)Check the air pressure if it is normal.
2)Check the electric wire if it get damage.
3.Temperature:When the seted time finish, and the
machine's indication light is bright,but the heating plate is
not hot,please check the circuit.
4.The pressure of the machine is not allowed to be adjusted
too large, in case cause damage to bearing.
5.If any quality problem please contact our company.
About Our Factory:
1.)Dong guan STC Machinery Co., Ltd is a professional producer factory for all kinds of heat press machine, heat transfer machine, sublimation heat transfer press machines. etc. it also is one of the biggest factory of heat press machine in CHINA.
2) We in this area more than 9 years, very professional and experienced.
3) Located in Chang'an town,dongguan city, we possess CE certificate.
Warmly welcomed to China to visit our office & factory, for any further more informations, please feel free to contact us.
CONTACT INFORMATION:
Contact person: Ms.Tina Yao
Mobile:+86-13058526550
TEL:+86-0769-85426311-810
English website : http://stcheatpress.en.made-in-china.com
Chinese website1: http://guizaichd.1688.com
Chinese website2: http://stcby.taobao.com
Eagle Wealth Enterprise Limited
Dongguan STC Machinery Equipment Co.,Ltd
Address: Jinsha East Road,The Fourth Industrial Zone,Xiagang,Chang'an Town, Dongguan City,Guangdong Province,China
