Sino water jets are able to cut complex shapes and parts in almost any material — From metals of all sorts, to stone, glass, ceramics, rubber, plastics and composites — All up to 8 inches thick.
With an additional cutting head, it's possible to further increase the machine's productivity and economically produce multiple parts. Compact Machine Design: Guide machine, water tank, settling tank, and control cabinet are mounted on one frame, making the machine easy to transport and requiring minimal installation. Robust system with small footprint and high operator comfort.
· No thermal stresses, hardening, or tensions on the part
· No dust, smoke or toxic fumes
· Small kerf width and very clean cut edges
· Virtually burr-free cuts = no rework necessary
· Direct plunge-cut at any position
· Very low mechanical stress on the part
· Low maintenance cost
· Low maintenance
· Long life of consumable parts thanks to a triple water filter system
With an additional cutting head, it's possible to further increase the machine's productivity and economically produce multiple parts. Compact Machine Design: Guide machine, water tank, settling tank, and control cabinet are mounted on one frame, making the machine easy to transport and requiring minimal installation. Robust system with small footprint and high operator comfort.
· No thermal stresses, hardening, or tensions on the part
· No dust, smoke or toxic fumes
· Small kerf width and very clean cut edges
· Virtually burr-free cuts = no rework necessary
· Direct plunge-cut at any position
· Very low mechanical stress on the part
· Low maintenance cost
· Low maintenance
· Long life of consumable parts thanks to a triple water filter system
| No. | Name | Parament | Unit | ||
| HY380 | HY420 | ||||
| 1 | Adjusting Range of Cutting Pressure | 0-380 | 0-420 | Mpa | |
| 2 | Working Pressure | 330-360 | 350-400 | Mpa | |
| 3 | Maximum Water Flow | 3.7 | 3.7 | L/min | |
| 4 | Water Nozzle(Stone)Diameter | Ø0.3-Ø0.33 | mm | ||
| 5 | Inner Hole Size of Sand-Mixed Pipe | Ø0.8 or Ø1.0 | mm | ||
| 6 | Maainframe Motor | Type | Y220L-4 | Y225L-4 | |
| Rating Power | 30 | 37 | Kw | ||
| Rating Rotating Speed | 1480 | 1480 | r/min | ||
| No. | Name | Parament | Unit | ||||||||
| 1 | Type | 4.0×2.0 | 4.0×1.5 | 3.0×2.0 | 3.0×1.5 | 2.5×1.5 | 2.0×1.5 | 1.6×1.5 | 1.2×1.0 | ||
| 2 | Maximum Cutting Range |
4000 × 2000 |
4000 × 1500 |
3000 × 2000 |
3000 × 1500 |
2500 × 1500 |
2000 × 1500 |
1600 × 1500 |
1200 × 1000 |
mm | |
| 3 | Travel of Knife Rest | 0-200 | mm | ||||||||
| 4 | Driving Speed | Servo Motor | 0-12000 | mm/min | |||||||
| 5 | Cutting Accuracy | ±0.20 | mm | ||||||||
| 6 | Controlling accurecy | ±0.01 | mm | ||||||||
| 7 | Working Motor | Servo Motor | |||||||||
| 8 | Air Compressor Pressure | 0.6-0.8 | MPa | ||||||||
| 9 | Abrasive | Garnet | |||||||||
| 10 | abrasive granularity | 60-100 | Item | ||||||||
| 11 | Microcomputer | 686 | |||||||||
| 12 | Program Software | SAME's Waterjet Scanning Program System | |||||||||
