Small Plastic Bottle Mineral Drinking Water Filling Machine
1. Using field
The CGF18-18-6 is a fully-auto multi-function bottle washing, filling and capping, 3-in-1 machine which is designed to fill the bottles with non-carbonated drinks, fruit juice, wine, mineral water, pure water and tea etc. The whole line is one of the most advanced beverage equipments in domestic market at present for its unique design, beautiful configuration, easy operation and high automation.
2. Main Technological Data
(1)Work heads: For bottle washing: 18 For bottle filling: 18 For bottle capping: 6
Main motor Power: 1.5Kw
(2)Height of bottle: 120-320 mm Diameter of bottle: 40-100mm
(3)Power: 380V 50Hz
(4)Total weight: 2000kg
(5) Dimension: 2300*1600*1900mm
Small Plastic Bottle Mineral Drinking Water Filling Machine
3. Working principle and main characteristic
1. Working principle:
When bottles are sent to the machine by conveyor continuously, they firstly are deliveried to the receiving wheel by air-slide conveyor and then to washing part. The bottle clamps hold the bottles and trun over 180° To wash, then return back to their original position after enough washing and drying. Then, the bottles are sent to the middle thumb wheel 1 and to the filling part to be filled, then moved by middle thumb wheel 2 and reach to capping part to be capped, at the same time, cap trimmer sends caps to the top of the bottles and capper screws caps. At last, bottles are sent to the conveyor chain by the out stirring wheel to next working position.
2. Main characteristic:
1. Adaptability is wide: Because all parts have a height adjust device, the height of bottle can be adjusted within the range of 120~320mm, the diameter can be adjusted within the range of Φ 40-100mm.
2. Production capacity can be adjusted continuously: Using a frequency inverter to control the speed. So it works more reliable.
3. This machine has a complete set of reliable protection system to protect the machine itself and the operator.
4. Compare with similar type of machine, it has following performances:
More compact in structure, more beautiful in appearance.
The structure of bottle rinsing clamp is more delicate.
Screw head uses magnetic parts.
Warm reminder!
Jiangmen Haiguang Drinking Water Equipment CO., Ltd all staff warmly welcome new or old customers come for consultation, we will be making detailed project plan, to realize low cost, high efficiency and scientific process combination. In order to make filling machinery achieved your ideal requirements Feel free to contact our sales personnel mobile number or email for the detailed proposal and further inquiry. We will develop a detailed project plan to achieve low cost, high efficiency, scientific combination of technology, to produce water to reach your ideal requirements. (Small Plastic Bottle Mineral Drinking Water Filling Machine )
1. Using field
The CGF18-18-6 is a fully-auto multi-function bottle washing, filling and capping, 3-in-1 machine which is designed to fill the bottles with non-carbonated drinks, fruit juice, wine, mineral water, pure water and tea etc. The whole line is one of the most advanced beverage equipments in domestic market at present for its unique design, beautiful configuration, easy operation and high automation.
2. Main Technological Data
(1)Work heads: For bottle washing: 18 For bottle filling: 18 For bottle capping: 6
Main motor Power: 1.5Kw
(2)Height of bottle: 120-320 mm Diameter of bottle: 40-100mm
(3)Power: 380V 50Hz
(4)Total weight: 2000kg
(5) Dimension: 2300*1600*1900mm
Small Plastic Bottle Mineral Drinking Water Filling Machine
3. Working principle and main characteristic
1. Working principle:
When bottles are sent to the machine by conveyor continuously, they firstly are deliveried to the receiving wheel by air-slide conveyor and then to washing part. The bottle clamps hold the bottles and trun over 180° To wash, then return back to their original position after enough washing and drying. Then, the bottles are sent to the middle thumb wheel 1 and to the filling part to be filled, then moved by middle thumb wheel 2 and reach to capping part to be capped, at the same time, cap trimmer sends caps to the top of the bottles and capper screws caps. At last, bottles are sent to the conveyor chain by the out stirring wheel to next working position.
2. Main characteristic:
1. Adaptability is wide: Because all parts have a height adjust device, the height of bottle can be adjusted within the range of 120~320mm, the diameter can be adjusted within the range of Φ 40-100mm.
2. Production capacity can be adjusted continuously: Using a frequency inverter to control the speed. So it works more reliable.
3. This machine has a complete set of reliable protection system to protect the machine itself and the operator.
4. Compare with similar type of machine, it has following performances:
More compact in structure, more beautiful in appearance.
The structure of bottle rinsing clamp is more delicate.
Screw head uses magnetic parts.
Warm reminder!
Jiangmen Haiguang Drinking Water Equipment CO., Ltd all staff warmly welcome new or old customers come for consultation, we will be making detailed project plan, to realize low cost, high efficiency and scientific process combination. In order to make filling machinery achieved your ideal requirements Feel free to contact our sales personnel mobile number or email for the detailed proposal and further inquiry. We will develop a detailed project plan to achieve low cost, high efficiency, scientific combination of technology, to produce water to reach your ideal requirements. (Small Plastic Bottle Mineral Drinking Water Filling Machine )
|
Model |
HG-SM -18 |
|
Production capacity |
1000-2000B/H |
|
Power |
0.75kw |
|
Overall dimensions (mm) |
1200×1200×1700 |
|
Weight |
700kg |
