Dryer Fabric, Low Permeability (90-155CFM), for Paper Machine Clothing.
Made By World-Class Weaving Looms and Heatsetting Tables
PRODUCT DESCRIPTION
-----------------------------------------------------------------------------------------------------------------------------------
In the dryer section, the paper sheet travels around large-diameter heated cylinders, where the balance of the water is removed by evaporation. Dryer fabrics hold the sheet tightly in contact with the cylinders through the dryer section. Constructed of monofilaments, dryer fabrics must be heat resistant, rugged, and designed for both drying efficiency and runnability. Keylife leads the industry in China in the design and application of dryer products, including the pin seam, active air handling, and heat-resistant fabrics.
Keylife single layer dryer fabric is composed of very smooth warp yarns in surface, which provide a high contact surface area between the fabric and the paper and thus the best possible transfer of heat from cylinders to the paper.
In comparison with common woven dryer fabrics, the fabric carries a very low amount of air. It considerably increases sheet runnability and therefore makes the fabric suitable for high speed paper machines.
The fabric contains excellent spiral seam, which is at the same level with the fabric and doesn't mark the paper. The air permeability of the seam is comparable to that of the fabric. The fabric is especially suitable for printing paper and for types of paper with superior surface quality requirements.
Warp / Weft : Polyester 0.31x0.56mm/ 0.4&0.7mm. Anti-Hydrolyses & Anti-Contamination Monofilament can be used if required.
Permeability Range: 90-155CFM Thickness: 1.51mm
Ultra-Fine Fabric Surface
High Performance at Aerodynamics to Improve Heat Transfer
High Performance at Anti- Hydrolyses
Good Seaming Structure, No Seam Mark
Easy to Install
Keep Clean Running on Paper Machine, Easy to Clean
Installation Assitance Available for Fabrics with Different Sizes
Excellent for Unirun
Good Application in Paper Making and Industrial Filtration
COMPANY INTRODUCTION
------------------------------------------------------------------------------------------------------------------------------------
KEYLIFE is a professional manufacturer of industrial fabrics in China. The plant ranks one of top 5 in the industry in the country, with a registered capital of USD 7.3 Million and an anual sale over USD 10 Million.
| Woven Farbics | Diameter (mm) | Density( /cm) | Air Permeability m³/m²h | Broken Strength N/cm | Elogation 98N/cm | Strength of Seam N/cm | Thickness mm | |||
| Style | Warp | Weft | Warp | Weft | ||||||
| 3 Shed Fabric | 24503 | 0.5 | 0.5 | 24-25 | 11-12 | 6000 | >2500 | <0.5% | >1000 | 1.6 |
Round Fabric | 24504 | 0.5 | 0.5 | 25-26 | 11-12 | 11000 | >2500 | <0.5% | >1000 | 2 |
| 24504-A | 0.5 | 0.5 | 24.5-25.5 | 11-12 | 7500 | >2500 | <0.5% | >1000 | 1.7 | |
| Flat Fabric | 4106-C-1 | 0.36*0.62 | 0.35/0.68 | 19-20 | 12-13 | 4000 | >1800 | <0.5% | >1000 | 1.5 |
| 4106-C-2 | 0.36*0.62 | 0.35/0.68 | 19-20 | 14-15 | 3000 | >1800 | <0.5% | >1000 | 1.5 | |
| 4106-D-1 | 0.36*0.62 | 0.5 | 19-20 | 12-13 | 5000 | >1800 | <0.4% | >1000 | 1.4 | |
| 4106-D-2 | 0.36*0.62 | 0.5 | 19-20 | 15-16 | 3000 | >1800 | <0.4% | >1000 | 1.4 | |
| 4106-K-1 | 0.32*0.8 | 0.4/0.68 | 19-20 | 12-13 | 4500 | >1900 | <0.35% | >1000 | 1.45 | |
| 4106-K-2 | 0.32*0.8 | 0.4/0.68 | 19-20 | 14-15 | 3000 | >1900 | <0.35% | >1000 | 1.45 | |
