The automatic CNC tube bender are equipped with coil material rack, straightening device, rotatable bending device and cutting device. Compared with traditional CNC tube bender, our equipment has more advantages. The automatic intensity of the equipment has already been improved greatly, it uses cutting tube without burrs and manipulator to fetch the products after the procedures of coil automatic feeding, straightening and bending.
| Specification/Model | WFCNC10 | ||
| Max. bending capacity(mm) | Φ10x1.25 | ||
| Min. bending capacity(mm) | Φ3 | ||
| Max. bending radius(mm) | 40 | ||
| Min. bending radius(mm) | 3 | ||
| Max. bending angle | 190 | ||
| Length of mandrel(mm) | 1800 | ||
| Mandrel stroke(mm) | 40 | ||
| Mandrel adjustment(mm) | 20 | ||
| Follower die stroke(mm) | 187 | ||
| Pipe end Min. length(mm) | 50 | ||
| Tools centerline height(mm) | 10 | ||
| Working height(mm) | 1015 | ||
| Speed range | Bending speed C(r/min) | 0-50 | |
| Feeding trolley walking speed Y(r/min) | 0-90 | ||
| Clamping set speed B(r/min) | 0-70 | ||
| Pre-set speed(each axis-CNC) | 9 | ||
| Working accuracy | Bending accuracy C axis(°) | ±0.05 | |
| Feeding accuracy Y axis(°) | ±0.1 | ||
| Rotary accuracy B axis(°) | ±0.05 | ||
| Capacity of memory | 10^5 | ||
| C-axis stall torque(N.m) | 93 | ||
| Motor power (KM) | 3 | ||
| Hydraulic system pressure(Mpa) | 15 | ||
| Hydraulic tank capacity(L) | 150 | ||
| Dimensions: L*W*H(m) | 3.1*0.91*1.36 | ||
