DongGuan TUSA Precision Tools Manufacture Co., Ltd. Is an Electronic clock, Mould, Car, Professional R&D design tools, Gathering production, sales, after-sales service as one factory.
The Corporation sets the introduction of Germany advanced processing equipments and testing equipments. The manufacture of steam and Germany professional the car engine tool WOLF group as a strategic and cooperative relations, The introduction of it advanced design break through traditional concept and technology. To providing the best products and services for our customers and partners
The Corporation sets the introduction of Germany advanced processing equipments and testing equipments. The manufacture of steam and Germany professional the car engine tool WOLF group as a strategic and cooperative relations, The introduction of it advanced design break through traditional concept and technology. To providing the best products and services for our customers and partners
| WEIX45HRC Roughing Square series - 2F/4F | ||||
| Material:© WC=0.8(UM)Co=10 HRA=92.2 HV=1620 Rupture=4000(kg.N/mm²) | ||||
| Mode | FD Flute Dia | SD Shank Dia | FL Flute Length | TL Total Length |
| WEIX601 Roughing | 3 | 3 | 8 | 50L |
| WEIX602 Roughing | 1 | 4 | 3 | 50L |
| WEIX603 Roughing | 1.5 | 4 | 4 | 50L |
| WEIX604 Roughing | 3 | 4 | 5 | 50L |
| WEIX605 Roughing | 2.5 | 4 | 6 | 50L |
| WEIX606 Roughing | 3.5 | 4 | 10 | 50L |
| WEIX607 Roughing | 4 | 4 | 11 | 50L |
| WEIX608 Roughing | 5 | 5 | 13 | 50L |
| WEIX609 Roughing | 1 | 6 | 3 | 50L |
| WEIX610 Roughing | 1.5 | 6 | 4 | 50L |
| WEIX611 Roughing | 2 | 6 | 5 | 50L |
| WEIX612 Roughing | 2.5 | 6 | 6 | 50L |
| WEIX613 Roughing | 3 | 6 | 8 | 50L |
| WEIX614 Roughing | 3.5 | 6 | 10 | 50L |
| WEIX615 Roughing | 4 | 6 | 11 | 50L |
| WEIX616 Roughing | 5 | 6 | 13 | 50L |
| WEIX617 Roughing | 6 | 6 | 15 | 50L |
| WEIX618 Roughing | 7 | 8 | 17 | 60L |
| WEIX619 Roughing | 8 | 8 | 20 | 60L |
| WEIX620 Roughing | 10 | 10 | 25 | 75L |
| WEIX621 Roughing | 12 | 12 | 30 | 75L |
| WEIX622 Roughing | 14 | 14 | 35 | 100L |
| WEIX623 Roughing | 16 | 16 | 40 | 100L |
| WEIX624 Roughing | 18 | 18 | 40 | 100L |
| WEIX625 Roughing | 20 | 20 | 40 | 100L |
| Lengthening | ||||
| WEIX626 Roughing | 3 | 3 | 15 | 75L |
| WEIX627 Roughing | 4 | 4 | 20 | 75L |
| WEIX628 Roughing | 5 | 5 | 25 | 75L |
| WEIX629 Roughing | 6 | 6 | 25 | 75L |
| WEIX630 Roughing | 7 | 8 | 25 | 75L |
| WEIX631 Roughing | 8 | 8 | 30 | 75L |
| WEIX632 Roughing | 3 | 3 | 15 | 100L |
| WEIX633 Roughing | 4 | 4 | 25 | 100L |
| WEIX634 Roughing | 5 | 5 | 30 | 100L |
| WEIX635 Roughing | 6 | 6 | 30 | 100L |
| WEIX636 Roughing | 8 | 8 | 35 | 100L |
| WEIX637 Roughing | 10 | 10 | 40 | 100L |
| WEIX638 Roughing | 12 | 12 | 45 | 100L |
| WEIX639 Roughing | 8 | 8 | 40 | 150L |
| WEIX640 Roughing | 10 | 10 | 50 | 150L |
| WEIX641 Roughing | 12 | 12 | 50 | 150L |
| WEIX642 Roughing | 14 | 14 | 70 | 150L |
| WEIX643 Roughing | 16 | 16 | 70 | 150L |
| WEIX644 Roughing | 20 | 20 | 80 | 150L |
| Tungsten Carbide Blank Rods Grades | |||||||
| Grade | WC | Co | Density | Hardness | TRS | Impact Strength | Application |
| 45HRC | (um) | % | g/cm³ | HRA HV | kg.N/mm² | kg.f-m/cm² | For:drills,endmills,reamers, gravers used for processing stainless steel,nickel chromium alloy,steel titanium alloy,heat-treaded steel,cast iron,aluminum alloy ,pure aluminum,plastics graphite etc... |
| WX15 | 0.8 | 10 | 14.4 | 92.2 1620 | 4000 | 0.50 | |
| 50HRC | |||||||
| TR20 | 0.6 | 12 | 14.1 | 92.5 1680 | 4200 | 0.60 | |
| 55HRC | |||||||
| TS25 | 0.5 | 13 | 14.05 | 92.8 1690 | 4350 | 0.65 | |
| 65HRC | |||||||
| TS30 | 0.2 | 9 | 14 | 93.6 1890 | 4600 | 0.75 | |
