--Guillotine beam design
--Integration hydraulic system
--Avoiding sheet sliding during cutting action, powerful holds downs with max. performance
--Ball bearing on the table to help placing sheets to machine easily
--Motorized back gauge with digital show
--Manually blade clearance adjustment
--Variable shearing angle to reduce the deformation of the shearing piece
--Upper knife carrier with inward structure, it's facilitate to feed the material
--Time delay relay controlling stroke, can be sheared in section
--Counter controlling the number of shearing
--The electronic and electric parts made of good brand, Schneider
--Standard front extensive arms
--Finger protective curtain
--High quality blade, four cutting edges blade to prolong working life, 6CrW2Si
--Foot pedal with emergency stop
Hydraulic system
1.Adopt integrated hydraulic control system, more reliable and easy for maintenance. The hydraulic system consists of motor, oil pump and valve groups and it is installed at the top of the oil box.
2.Every complete working cycle can be achieved through the control of hydraulic valve.The remote adjustment valve can adjust the working pressure at the right side of the wall board.
3.All seals in cylinder is imported,the most famous brand,good quality and high performance.
4.Overload overflow protection is outfitted to hydraulic system,which can assure no leakage,and the oil level can be read or seen directly.
Cutting control system
1.The cutting times of this machining tool is displayed on a Estun E21S NC and accurately show the cut after the block size and number display.
2.The parallelism of the sheet to be cut off and the precision of the shear size can be ensured. The cut stroke and cut times also can be controlled.
3.Light alignment device eases drawing line for cutting, Standard front support sheet frame, A set of standard blades.
4.System uses a bladder-type hydraulic accumulator as an auxiliary energy,absorb the pressure shock,the machine is running smooth,low noise.
